ICS TRIPLEX T9451

Description

[Product characteristics]

① Brand: ICS TRIPLEX

② Model: T9451

③ Inventory quantity: 10

④ Color: new

⑤ Freight: according to different local freight forwarders, the freight in different regions shall prevail.

⑥ Include tariff or not: do not include any taxes

⑦ Packaging: use the Seller’s safe packaging

The following enhancements are included in this release.

 Increase Variable Bindings Memory

The Variable Bindings (KVB) memory has been increased in size

from 64 K to 128 K. This will allow you to increase the number of

variable bindings that you can set up between controllers in an

application.

 New Workbench license for 5 Users, Unlimited Controllers

New license option T9084U is available: this is an AADvance

Workbench license for 5 Users and no limit to the number of

controllers. It is only available as a USB license option: it will work

with Windows XP Service Pack 3; Windows Vista; Windows 7 and

Server 2003 in both 32-bit and 64-bit versions.

The following problems and anomalies have been corrected in this release.

 Digital Output Module Shutting Down

Under certain operating and environmental conditions noise can be

present of one of the digital output module voltage rails. These

voltage rails are sampled to ensure that they are within a specific

tolerance; but the noise occasionally caused the monitoring circuit to

report an over-voltage, resulting in the DO module shutting down.

An internal filter has been improved that reduces the effect of the

noise and prevents the module from shutting down.

I/O initialization stalled – TN30051-01 (answer id. 544046)

If, during a controller start-up an I/O module failure occurs it can

stop the I/O initialization. As a result, the controller start-up process

fails to complete, leaving the application program suspended.

Changes to the controller start-up have been made that prevents this

from occurring.

 System power up with a 48 module configuration

The maximum number of I/O modules supported by an AADvance

controller is 48. Certain configurations, particularly when the

majority is Digital Output Modules, can result in a system not

starting-up correctly after a power cycle. Changes to the controller

start-up have been made to prevent this from occurring.

 Processor loss of synchronization

In dual processor configurations it was possible under certain

conditions for the two processors to lose synchronization, but

continue to run asynchronously. Although the I/O still went to its

fail-safe mode, it was possible for any binding data to be incorrect.

Changes to the controller have been made to prevent this from

occurring.

 Spurious Soft Error Detection (SED) faults – TN30056-01

(answer id: 564815)

Each AADvance module uses one or more FPGA’s to provide the

communication interface between the processor and the I/O

modules. The manufacturer of the FPGA used in AADvance

released a Product Notification identifying that this device could

spuriously generate SED errors. The FPGA manufacturers

recommended changes have been made to the controller to prevent

this from occurring.

 Processors lost synchronization after an on-line update

It is possible that on-line updates to a large system with more than 37

I/O modules installed can cause the processors to lose

synchronization. Changes to the controller have been made to

prevent this from occurring.

 Loss of SNCP Kernel Variable Bindings (KVB) communication

Under certain conditions it was possible for both links of dual SNCP

bindings configuration to fail. Changes to the controller have been

made to prevent this from happening.