GE VMIACC-0584

Description

Part Number VMIACC-5595-208

• Enclosure: Rack Mount or Desktop

• Number of Single-Mode (10km) Pluggable Transceivers: 0

• Number of Multimode Pluggable Transceivers: 8

Part Numbers: 350-805595-208E, 350-805595-208H

Product Family: 7035-01-597-0578, 7035015970578, 7035-01-596-3403, 7035015963403

PLC system is divided into logic circuit grounding and power circuit grounding. There are three ways: common grounding, floating grounding, shell common grounding and circuit floating grounding. Generally, the controller and other equipment should be grounded separately. When grounding, pay attention to: the grounding wire should be as thick as possible, and generally more than 2mm2 should be grounded; The grounding point shall be as close as possible to the controller, and the distance between the grounding point and the controller shall not be greater than 50m; The grounding wire should avoid the wires of the strong current circuit and the main circuit as far as possible. If it cannot be avoided, it should intersect vertically and shorten the length of parallel wiring as far as possible.

Practice has proved that grounding is often an important means to suppress noise and prevent interference. A good grounding method can greatly inhibit the coupling of internal noise, prevent the invasion of external interference, and improve the anti-interference ability of the system.