GE IS215ACLEH1BB

Description

Product Description
The IS215ACLEH1B model is part of the EX2100e series as an Application Control Layer Module and will typically be a microprocessor-based controller. The primary use of this board is to perform several different duties over communication networks such as ISBus and Ethernet. When the board has been mounted it will occupy two half-slots in the EX2100 exciter board rack or Innovation Series drive. The ACLE board will also be located within the control cabinet. There are a number of different software features which include but are not limited to the following:

I/O points and Internal Booleans forcing

Application control for Innovation Series drives

Non-volatile flash memory

Online application configuration loading

Control block

The IS215ACLEH1B board uses an Ethernet connection that uses IRQ 5 initialized by the BIOS function on the board. The Ethernet connection on the ACLE board is a 10baseT or RJ45 jack which is located on the front panel of the ACL board. As a microprocessor-based control, the board has a peripheral component interconnect (PCI) controller that will manage the different inputs and outputs, configuration transfers to and from the PCI bus as well as manage a variety of memory functions.

The IS215ACLEH1B model also has a 128 KB L2 Cache which is used with and controlled by the PCI controller, this cache is set at a 152 NC cache line which will fill the line between the L1 and L2 cache. Another feature of the ACLE board is a flash memory device, this memory device is located on the local bus side of the target interface and is known as Device 1, the device can only be accessed in byte mode.

KJ3222X1-BA1
KJ4001X1-HC1
KJ4001X1-BA3
KJ3241X1-BA1
KJ3203X1-BA1
KJ2003X1-BA2
KJ2003X1-BA2
KJ4001X1-BE1
KJ3201X1-BA1
KJ3201X1-BA1
KJ3008X1-BA1
KJ3002X1-BC1
KJ4010X1-BG1
KJ4001X1-HC1
KJ4001X1-HC1