GE IC695CHS016

Description

The RX3i Universal Backplane supports both PCI-based (IC695) and serial (IC694) I/O and option modules with its
dual-bus backplane. The RX3i Universal Backplane also supports 90-30 IO and option modules. See the
PACSystems RX3i System Manual, GFK-2314 for lists of supported modules. Features of the Universal Backplane
include:
▪ Terminal Strip on the left end for Isolated +24V input
▪ Backplane grounding point
▪ An integral grounding bar for connecting module/shield grounds
▪ Serial Expansion connector for connection to Serial Expansion and Remote Backplanes
▪ Slot numbers printed on the backplane that can be used as a reference for configuration.
Release History
Catalog Number Date Description
IC695CHS012 / 016-CA April 2009 Hardware changes for EU-RoHS compliance
IC695CHS012 / 016-BAMP February 2009 Improved immunity against environmental noise
IC695CHS012 / 016-BA September 2007 ATEX approval for Group 2, Category 3
applications.
IC695CHS012 / 016A August 2004 Initial product release
Installation in Hazardous Locations
▪ WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2;
▪ WARNING – EXPLOSION HAZARD – WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE
REPLACING OR WIRING MODULES; AND
▪ WARNING – EXPLOSION HAZARD – DO NOT CONNECT OR DISCONNECT EQUIPMENT UNLESS POWER
HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.
▪ EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D, DIV. 2 HAZARDOUS
LOCATIONS IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS
LOCATIONS ONLY

VMIVME-4150 GE

PM150V08 control unit

5SHX0660F0002 ABB

DS3800HFXA1D1B GE

5SHY3545L0009 SCR spot

T8451 ICS TRIPLEX (ROCKWELL) Spot

3BSE018161R1 PM864AK01 ABB Switzerland module

IS215VCMIH2C GE card

HIEE300024R4 UAA326A04 ABB

VE3007 EMERSON module

F8627X HIMA stock

MAC112D-O-HD-2-C/130-A-1 INDRAMAT

216VC62A ABB module

A4H124-24FX Enterasys US Switch