GE IC698CPE010

Description

GE IC698CPE010
The RX7i CPUs are programmed and configured by the programming software to perform real
time control of machines, processes, and material handling systems. The CPU communicates
with I/O and smart option modules over a rack-mounted backplane using the VME64 Standard
format. It communicates with the programmer and HMI devices via the embedded Ethernet ports
or a serial port using SNP Slave protocol.
CPE010: 300MHz Celeron microprocessor
CPE020: 700MHz Pentium III microprocessor
Features
▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user
memory.
▪ Provides access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram.
▪ Supports auto-located Symbolic Variables that can use any amount of user memory.
▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for
analog %AI and %AQ.
▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a
list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223.
▪ Supports all VME modules supported by Series 90-70.
▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server
and FTP connections.
▪ Supports up to 512 program blocks. Maximum size for a block is 128KB.
▪ Test Edit mode allows you to easily test modifications to a running program.
▪ Bit-in-word referencing.
▪ Battery-backed calendar clock.
▪ In-system upgradeable firmware.
▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232
Ethernet station manager serial port.
▪ The embedded Ethernet interface provides:
 Data exchange using Ethernet Global Data (EGD)
 TCP/IP communication services using SRTP
 Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client
 Full programming and configuration services
 Comprehensive station management and diagnostic tools
 Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network
switch providing auto-negotiated network speed, duplex mode, and crossover detection.
 User-configurable Redundant IP address
 Time synchronization to SNTP time server on Ethernet network (when used with
Release 5.00 or later CPU module).

IS200TBTCH1CBB GE

TGX-760E11AAAGNND6 MOORE

2711P-T12C4D8+2711P-RN15S A-B

BRC400 ABB

CPU3680 MOTOROLA

MPL-B540K-SJ24AA A-B

UNITROL 1010 ABB

REM615 ABB

2711E-T14C15 A-B

DSAI130D ABB Switzerland module

DDS-LPS RELIANCE ELECTRIC

MTS-P01.2-D2-B1-NN-NN-NN-FW REXROTH

CE4006P2 DCS communication card for Deltav system