GE IC697PCM711P

Description

GE IC697PCM711P
Features
• Single slot Coprocessor
• Dual Tasking
• MegaBasic

• CCM2 Protocol
• 12 Mhz, 80C186 microprocessor
• 90% of an IBM
AT performance
• Up to 96 Kbytes battery-backed CMOS logic and
data memory on board
• Supports up to 512 Kbytes optional expansion
memory
• Programmed by IC647, IC640 or IBM-compatible
Personal Computer
• Two RS-422/RS-485 or RS-232 serial ports
• High performance access to PLC memory
• Real time calendar clock synchronized to PLC
• Reset pushbutton
• Three Status LEDs
• Soft Configuration (No dip switches or jumpers)
with MS-DOS
or Windows
based programming software configuration function
• Simultaneous communications on both ports at up
to 9.6 Kbaud, or up to 19.2 Kbaud individually.
Functions
The Programmable Coprocessor Module (PCM) is a
Coprocessor to the PLC CPU. It can be programmed
to perform operator interface, real time computations,
data storage, data acquisition and data communications functions. It communicates with the PLC CPU
over the backplane and can access user and system
data using extensions to the powerful MegaBasic language. No application program support is required in
the PLC CPU.
Many PCMs can be supported in a single IC697 PLC
system and each can accommodate an optional expansion memory up to 512 Kbyte

3401 TRICONEX card

SR161 KEBA stock

PP220 3BSC690099R1 ABB

SDN-DRI-025 SANYO card

3704E TRICONEX card

0190-51546REV03 INFICON

IC697CPM790 GE module

IS215VPROH1BD American card

16413-1-05 Moore module

07KT98 H4GJR5253100R3262 ABB

4200 TRICONEX US Card

TK-PRR021 HONEYWELL module

FCP270 discontinued spare parts module

VT-VPCD-1-16/V0/1-P-1 Rexroth module

AS-B883-201 SCHNEIDER Spot