BENTLY 3500/22M 288055-01

Description

The 3500/22M Transient Data Interface (TDI) is the interface
between the 3500 monitoring system and compatible
software (System 1 Condition Monitoring and Diagnostic
software and 3500 System Configuration software). The TDI
combines the function of a 3500/20 Rack Interface Module
(RIM) with the data collection capability of a communication
processor such as TDXnet.
The TDI resides in the slot adjacent to the power supplies of a
3500 rack. It interfaces with M series monitors (3500/40M,
3500/42M, etc.) to continuously collect steady state and
transient dynamic (waveform) data and pass this data through
an Ethernet link to the host software. Refer to the
Compatibility section at the end of this document for more
information.
Static data capture capability is standard with the TDI.
However, using an optional Channel Enabling Disk will allow
the TDI to capture dynamic and high-resolution transient data
as well. The TDI incorporates the communication processor
function within the 3500 rack.
Although the TDI provides certain functions common to the
entire rack, it is not part of the critical monitoring path and has
no effect on the proper, normal operation of the overall
monitor system for automatic machinery protection. Every
3500 rack requires one TDI or RIM, which always occupies Slot
1 (next to the power supplies).

Specifications
Inputs
Power
Consumption 10.5 Watts
Data
Front Panel USB-B
10Base-T/
100Base-TX I/O
10Base-T or 100Base-TX
Ethernet, autosensing
100Base-FX I/O 100Base-FX Fiber-Optic
Ethernet
Outputs
Front Panel LEDs
OK LED Indicates when the 3500/22M is
operating properly
TX/RX LED
Indicates when the 3500/22M is
communicating with the other
modules in the rack
TM LED Indicates when the 3500 rack is in
Trip Multiply mode
CONFIG OK
LED
Indicates that the 3500 rack has a
valid configuration
I/O Module OK Relay
Function
Indicates when the 3500 rack is
operating normally or when a
fault has been detected within
the rack. User can select either an
“OPEN” or “CLOSED” contact to
annunciate a NOT OK condition.
This relay always operates as
“Normally Energized”.
Ratings
Standard OK Relay is rated to 5A
@ 24 Vdc/120 Vac, 120
Watts/600 VA Switched Power
(maximum)
OK Relay with gold-plated
contacts is rated down to 1 mA
@ 1 Vdc (minimum)
Arc
Protection Arc suppressors are provided