TRICONEX AI6700

Description

TRICONEX AI6700
of a single fault and may continue to
operate properly with multiple faults.
AO Modules support a hot-spare
module. Each AO Module is mechanically keyed to prevent improper installation in a configured baseplate.
The Model TRICONEX AI6700 AO Module can be
used with these baseplates:
• Model TRICONEX AI6700, which is used in typical
applications.
• Model TRICONEX AI6700, which enables
communication between HART
field devices and Configuration and
Asset Management Software
running on a PC.
• Model TRICONEX AI6700, which is used in
hazardous locations and enables
communication between HART
field devices and Configuration and
Asset Management Software
running on a PC.
• DO External Termination Baseplate,
which is used with the Model TRICONEX AI6700 External Termination Panel in
hazardous locations. Note that “DO”
is not a typo, the DO External
Termination Baseplate is used with
the 9863-610.
The Model 3482 High-Current AO
Module is compatible with only the
Model 2481 Analog Output Baseplate.
Model 3481 Analog Output Module Specifications
Model 3482 High-Current Analog Output Module Specification
Feature Specification
Points 4, commoned-return, DC-coupled
Isolated points None
Output current range 4–20 mA output, controlled
0–22 mA over-range
0 mA output capability (step function < 2 mA) Output accuracy <0.25% (in range of 4–20 mA) of FSR (0–22 mA), from 32° F to 158° F (0° C to 70° C) Type TMR Resolution 12 bits Diagnostic Forced-switch diagnostic (FSD) External loop power (reverse voltage-protected) 32 VDC, maximum 24 VDC, nominal Output loop power requirements for specified load 300 :@ >16 VDC (1 A minimum)
500 :@ >20 VDC (1 A minimum)
700 :@ >24 VDC (1 A minimum)
800 :@ >28 VDC (1 A minimum)
Over-range protection 36 VDC, continuous
0 VDC, continuous
Switch time on leg failure 1 ms, typical
3 ms, maximum
Feature Specification
Points 4, commoned-return, DC-coupled
Isolated points None
Output current range1
(Points 3 and 4)
1. Points 1 and 2 are the same as for Model 3481.
4–40 mA output, controlled
0–44 mA over-range
0 mA output capability (step function <4 mA) Output accuracy1 (Points 3 and 4) < 0.25% (in range of 4–40 mA) of FSR (0–44 mA), from 32° F to 122° F (0° C to 50° C) Type TMR Resolution 12 bits Diagnostic Forced-switch diagnostic (FSD) External loop power (reverse voltage-protected) 32 VDC, maximum 24 VDC, nominal Output loop power requirements for specified load1 (Points 3 and 4) 125 :@ >16 VDC (1 A minimum)
210 :@ >20 VDC (1 A minimum)
295 :@ >24 VDC (1 A minimum)
340 :@ >28 VDC (1 A minimum)
Over-range protection 36 VDC, continuous
0 VDC, continuous
Switch time on leg failure 1 ms, typical
3 ms, maximum