HONEYWELL CC-PDOD51

Description

The list of I/O modules below can be used on a Series C IOLINK. The IOLINK contains a function that enables
programming and reprogramming the executable image (rather than substitution of a removable hardware
component). The preferred method of delivery of the image is over the IOLINK.
Tip
Series C IOLINK cannot contain any PM I/O IOPs.
C300 IOLINK block parameter IOLINKTYPE is used to determine if the IOLINK supports either Series C I/O or
PM I/O.
Table 6: Available I/O modules
IOM model names IOM block name Description # of
chnls
Similar to PMIO
type
IOP model names
CU-PAIH01
CC-PAIH01
AI-HART High Level Analog Input with
HART
(supports differential inputs on
only channel 13 through channel
16)
Refer to Attention
16 HLAIHART
CC-PAIH02 AI-HART High Level Analog Input with
HART
((supports differential inputs on all
16 channel)
16 HLAIHART
CC-PAIX02 AI-HART High Level Analog Input with
Differential/Single-ended nonHART
(supports differential inputs on all
16 channels)
16 HLAI
CC-PAIX01 AI-HL High Level Analog Input with
Differential non-HART
(supports differential inputs on
only channel 13 through channel
16)
Refer to Attention
16 HLAI
CU-PAIN01
CC-PAIN01
AI-HL High Level Analog Input with
non-HART
16 HLAI
CC-PAIH51 AI-HART 1 Modem, High Level Analog
Input with HART
16 HLAIHART
CU-PAON01
CC-PAON01
AO Analog Output with non-HART 16 AO16
CU-PAOX01
CC-PAOX01
AO Analog Output with non-HART
Refer to Attention
16 AO16
CU-PAIM01
CC-PAIM01
AI-LLMUX1 Low Level Analog Input Mux 64 LLMUX
CC-PAIM51 AI-LLAI Low Level Analog Input Mux 16 LLAI
3 SERIES C I/O PLANNING AND DESIGN
44 www.honeywell.com
IOM model names IOM block name Description # of
chnls
Similar to PMIO
type
IOP model names
CU-PAOH01
CC-PAOH01
AO-HART Analog Output with HART 16 AO16HART
CC-PAOH51 AO-HART 1 Modem, Analog Output with
HART
16 AO16HART
CU-PDIH01
CC-PDIH01
DI-HV High Voltage Digital Input (IOM
supports both 120 and 240 volts
AC)
32 DI
CU-PDIL01
CC-PDIL01
DI-24 Low Voltage Digital Input (24
volts DC)
32 DI
or
DI24V
CC-PDIL51 DI-24 Low Voltage, Digital Input (24
volts DC)
32 DI
CU-PDIS01
CC-PDIS01
DI-SOE Low Voltage Digital Input (24
volts DC)
32 DISOE Mx-PDIS12
CU-PDOB01
CC-PDOB01
DO-24B2 Bussed Low Voltage Digital
Output (24 volts DC)
32 DO_32
CC-PDOD51 DO-24B Bussed Low Voltage, Digital
Output (24 volts DC)
32 DO32
CU-PSOE01
CC-PSOE01
DI-SOE Low Voltage Digital Input SOE
(24 volts DC)
32 DISOE
CC-PSP401 SP Speed Protection 26
CC-PSV201 SVP Servo Valve Positioner 8
CC-PPIX01 PIM Pulse Input Module 8 PI IOP
CC-PUIO01 UIO Universal Input/Output Module 32
CC-PUIO31 UIO Universal Input/Output Module 32
Series C Mark II IOM
CC-PAIH01 AI-HART High Level Analog Input with
HART
16
CC-PAOH01 AO-HART Analog Output with HART 16
DC-PDIL51 DI-24V Digital Input (24 volt DC) without
Open Wire Detection
32
DC-PDIS51 DI-SOE Low-Voltage Digital Input SOELow Resolution (24 volts DC)
without Open Wire Detection
32
DC-PDOD51 DO-24B Bussed Low Voltage Digital
Output (24 volts DC) without
Open Wire Detection
32
CC-PAIH51 AI-HART 1 Modem, High Level Analog
Input with HART
16 HLAIHART
CC-PAOH51 AO-HART 1 Modem, Analog Output with
HART
16 AO16HART
CC-PAIN01 AI-HL High Level Analog Input with
non-HART
16 HLAI
CC-PAON01 AO Analog Output with non-HART 16 AO16
3 SERIES C I/O PLANNING AND DESIGN
45
Following Series C IO modules introduced in Experion PKS R410.
HART Analog Input CC -PAIH51
HART Analog Output CC-PAOH51
Digital Input 24V DC CC-PDIL51
Digital Output 24V DC CC-PDOD51
These modules must be used only with Experion PKS R410 and later. These modules will not work as expected
with earlier releases of Experion PKS. Using these with Experion releases prior to R410 by downgrading the
firmware may render the module faulty and may not be possible to recover.
NOTES:
1. There are two models of High Level Analog Input such as, CU-PAIX01 and CU-PAIN01. The Module
Hardware and the corresponding IOTAs are different and CU-PAIN01 is a new model. From the perspective
of configuration and implementation, both High Level Analog Input models use the same IOM Block such
as, AI-HL. It must be noted that the two models utilize the same configuration; online migration is not
possible as mixed redundant pair is not possible. There are two models of Analog Output such as, CUPAOX01 and CU-PAON01. Hence, similarly configuration, implementation, and interoperability constraints
apply and CU-PAON01 is the new model.
2. Two new models of AI-HART (CC-PAIH02) and AI-HL (CC-PAIX02) modules are introduced to replace
the older models of the AI-HART (CC-PAIH01) and AI-HL (CC-PAIX01) modules. The new models
support both single-ended and differential inputs.
3. With R410, a new model of HART Analog Input CC-PAIH51 is introduced. The HART Analog Input CCPAIH51 and Cx-PAIH01 use the same IOM block, that is, AI-HART. The configuration and implementation
mentioned in note 1 applies to the HART Analog Input module.
4. With R410, a new model of HART Analog Output CC-PAOH51 is introduced. The HART Analog Output
CC-PAOH51 and Cx-PAOH01 use the same IOM block, that is., AO-HART. The configuration and
implementation mentioned in note 1 applies to the HART Analog Output module.
5. With R410, a new model of Digital Input 24V DC CC-PDIL51 is introduced. The Digital Input 24V DC CCPDIL51 and Cx-PDIL01 use the same IOM block, that is, DI-24. The configuration and implementation
mentioned in note 1 applies to the Digital Input 24V module.
6. With R410, a new model of Digital Output 24V DC CC-PDOD51 is introduced. The Digital Output 24V DC
CC-PDOD51 and Cx-PDOB01 use the same IOM block, that is, DO-24B. . The configuration and
implementation mentioned in note 1 applies to the Digital Output 24V module.
7. Starting with R430, a new model of Low Level Analog Input Mux CC-PAIM51 is introduced.
8. The UIO (CC-PUIO01) has 32 configurable input or output channels. Each channel can be configured as
one of the following:
• Analog Input (0-20mA or 4-20mA active)
• Analog Output (4-20mA active)
• Digital Input (with or without line monitoring)
• Digital Output (with or without line monitoring)
9. The UIO (CC-PUIO31) module is introduced with R432 and has 32 configurable input or output channels
that are identical to the UIO (CC-PUIO01) module.