HONWYWELL CC-IP0101 51410056-175

Description

HONWYWELL CC-IP0101 51410056-175This document provides technical information for the Series 8 Profibus Gateway Module, released with Experion LX.
The PROFIBUS Gateway Module provides a common module platform to support the interface to the PROFIBUS DP
and the C300 Controller. The PGM is developed in the Series 8 form factor for use with the C300 Controller. The Series
8 form factor employs an Input Output Termination Assembly (IOTA) and an electronics module which mounts and
connects to the IOTA.
As a PROFIBUS gateway, PGM is always a master and communicates with the PROFIBUS compatible slave devices.
The PGM mounts in the same fashion and shares all characteristics, power and grounding, certifications, and meets all
environmental rating as all other Series 8 components.
The PGM is optionally redundant and supports two DP networks per module.
The PGM supports the following functions.
• Redundancy
• Cold start command
• Experion LX by Experion events and alarms
• Experion LX by Experion Bulk Build utility
• Experion LX by Experion import/export functionality
• Qualification and Version Control
• Peer-to-peer communications
IOTA Characteristics:
• Standard six inch Series 8 IOTA
• Mounts onto a standard Series 8 carrier channel assembly. Power per header board though cables.
• Redundancy is configured with two IOTAs interconnected by a redundancy sync cable (orange CAT5e, uses the
same as those used for C300 redundancy).
• Provides two to 9-pin D-subminiature female PROFIBUS network connections.
• Each 9-pin D-sub connector provides 5 VDC +/-5% for terminator bias voltage (power is sourced from the PGM
module).
• Provides Cat5e connections for standard FTE cables.
• Provides 3 rotary switches to set FTE device index (address)