Vibro-meter VM600-ABE040 204-040-100-011

Description

Vibro-meter VM600-ABE040 204-040-100-011
KEY FEATURES AND BENEFITS
• From the vibro-meter® product line
• 19″ system racks with a standard height of 6U
• Robust aluminium construction
• Modular concept allows specific cards to be
added for machinery protection and/or
condition monitoring
• Cabinet or panel mounting
• Backplane supporting the VME bus, the
VM600Mk2/VM600 system’s Tacho, Raw and
Open collector (OC) buses, and power supply
distribution
• Uses the VM600Mk2/VM600 RPS6U rack power
supply: AC and/or DC input versions
• Power supply check relay
APPLICATIONS
• VM600Mk2/VM600 machinery protection and/
or condition monitoring systems
DESCRIPTION
The VM600Mk2/VM600 ABE040 and ABE042 system
racks are used to house hardware for the
VM600Mk2/VM600 series of machinery protection
and/or condition monitoring systems, from
Meggitt’s vibro-meter® product line.
Two types of VM600Mk2/VM600 ABE04x system
rack are available: the ABE040 and the ABE042.
These are very similar, differing only in the position
of the mounting brackets. Both racks have a
standard height of 6U and provide mounting
space (rack slots) for up to 12 single-width
VM600Mk2/VM600 modules (card pairs), or a
combination of single-width and multiple-width
modules (cards). These racks are particularly
suitable for industrial environments, where
equipment must be permanently installed in 19″
cabinets or panels.

DESCRIPTION (continued)
The different versions of ABE04x system rack
enable different mounting options to support
various markets and applications.
The VM600 system rack has an integrated VME
backplane which provides the electrical
interconnections between the installed
VM600Mk2/VM600 modules (cards): power supply,
signal processing, input /output, relay and
CPUx “rack controller”. It also includes a power
supply check relay, available at the rear of the
rack, which is used to indicate that the installed
RPS6U rack power supplies are operating
normally.
Either one or two RPS6U rack power supplies can
be installed in a VM600Mk2/VM600 ABE04x system
rack. A rack with one RPS6U power supply (330 W
version) supports the power requirements for a full
rack of modules (cards) in applications with
operating temperatures up to 50°C (122°F).
Alternatively, a rack can have two RPS6U power
supplies installed in order to either support rack
power supply redundancy or in order to supply
power to the modules (cards) non-redundantly