Vibro-meter 620-002-000-113 620-003-111-112 VM600 XIO16T

Description

Vibro-meter 620-002-000-113 620-003-111-112 VM600 XIO16T
Environmental
Temperature
• Operating : −25 to 65°C (−13 to 149°F)
• Storage : −40 to 85°C (−40 to 185°F)
Humidity
• Operating : 0 to 90% non-condensing
• Storage : 0 to 95% non-condensing
Approvals
Conformity : CE marking, European Union (EU) declaration of conformity.
EAC marking, Eurasian Customs Union (EACU) certificate /
declaration of conformity.
Electromagnetic compatibility : EN 50081-2 and EN 50082-2.
IEC/EN 61000-6-2 and IEC/EN 61000-6-4.
TR CU 020/2011.
Electrical safety : IEC/EN 61010-1.
TR CU 004/2011.
Vibration : IEC 60255-21-1 (Class 2)
Insulation coordination for measuring
relays and protection equipment
: Separate circuits according to IEC 60255-5
for the “separate circuits” version of the IOC4T
Safety integrity level : SIL 1 according to IEC 61508
Environmental management : RoHS compliant
Russian federal agency for technical
regulation and metrology (Rosstandart)
: Pattern approval certificate CH.C.28.004.A N° 60224
Communications
MPC4 to IOC4T bus : Similar to industry pack (IP)

Configuration
MPC4/IOC4T card pair : Software configurable via an RS-232 or Ethernet connection, using
a computer running the VM600 MPSx software.
Hardware configurable using jumpers on the MPC4/IOC4T card
pair.
Note: Configuration via an Ethernet connection requires a CPUx card acting as a rack controller in the VM600
rack.
Status indicators (LEDs)
SLOT ERROR : Used to indicate indicates whether the IOC4T is installed in the
correct slot of the VM600 rack
Power supply to card (input)
Power source : VM600 rack power supply
Supply voltages : +5 VDC and ±12 VDC
Consumption from +5 VDC supply : 1.5 W
Consumption from ±12 VDC supply : 0.7 W, plus an additional 0.25 W per current output used

Connectors
J1 : 16-contact screw-terminal connector.
Inputs (analog signals) for dynamic measurement channels 1 to 4.
J2 : 16-contact screw-terminal connector.
Inputs (analog signals) for tachometer (speed) channels 1 to 2.
Outputs (contacts) for relays RL1 to RL4.
J3 : 16-contact screw-terminal connector.
Outputs (analog signals) for DC outputs 1 to 4.
Inputs (digital signals) for DSI control signals: AR, DB and TM.
Outputs (analog signals) for buffered “raw” sensor outputs for
dynamic measurement channels 1 to 4.
Physical
Height : 6U (262 mm, 10.3 in)
Width : 20 mm (0.8 in)
Depth : 125 mm (4.9 in)
Weight : 0.25 kg (0.55 lb) approx.