Vibro-meter 200-505-012-011

¥799.00

Vibro-meter 200-505-012-011The alarms and relays must be configured depending on the role of the VM600 in the
safety loop.
• If a safety function is performed by a VM600-rack based system only, any safety
relay corresponding to an alarm must be configured as latching and normally
energised (de-energised to trip).
• If a safety function is performed by an external system using an alarm detected by
a VM600-rack based system as an input, the relay corresponding to this alarm may
not be configured as latching.
However, an analysis must be carried out at the safety-related system level to
ensure that no alarm can be missed or to identify all possible impacts and
acceptability of residual risks in case of a missed alarm.
• If a safety function uses a VM600-rack based system alarm that is configured as latching,
the use of an alarm delay time is not allowed.
• The use of the VM function danger bypass (DB) is not allowed.
• The use of the VM function trip multiply (TM) is not allowed.
• The use of the VM function channel inhibit is not allowed.

Category: PLC

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Vibro-meter 200-505-012-011
Vibro-meter 200-505-012-011
NOTE: If you are in any doubt as to the validity of a particular configuration then you should
contact Meggitt customer support for assistance (see 4.1 Contacting us).
The checks summarised in Table 1-7 apply only to racks using an RLC16 relay card as part
of a safety function.
The checks summarised in Table 1-8 need only to be made if a signal from a sensor that is
locally attached to the safety-relevant IOC4T is routed using the Raw Bus to a separate
VM600 card, such as an XMV16 vibration monitoring card. The measures for the XIO16T are
needed to cover the unlikely event of a failure of the MOSFET switch matrix that is used by
this card.
Other cards use a physical jumper matrix only to racks using an RLC16 relay card as part of
a safety function.
Table 1-7: OC Bus checks for safety-related systems that contain a RLC16 card
Rack contains Verification step Configuration aid
Single MPC4/IOC4T
card pair No additional checks are required
Additional MPC4/IOC4T
card pairs Check the configuration for conflicts VM600 MPSx©
software
Additional AMC8/IOC8T
card pairs
Place in a different OC Bus partitionSee
note 1
VM600 MPSx©
software
IRC4 card Place in a different OC Bus partitionSee
note 1
IRC4 Configurator
software
XMx16/XIO16T
card pairs
Place in a different OC Bus partitionSee
note 1
VibroSight®
software
Notes
1. The split of the OC Bus into six (6) discrete sections is described in section 3.4.3 The Open Collector Bus of the
VM600 machinery protection system (standard version) hardware manual.

Rack contains Verification step / requirement Configuration aid
Single MPC4/IOC4T
card pair No additional checks are required
Additional MPC4/IOC4T
card pairs Check the configuration for conflicts VM600 MPSx©
software
Additional AMC8/IOC8T
card pairs Check for double utilisation VM600 MPSx©
software
CMC16/IOC16T
card pairs No additional checks are required
IRC4See note 1 Verify configuration
XMx16/XIO16T
card pairs Verify configuration VibroSig

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!