Vibro-meter 209-500-100-SSS VM600 MPSx

Description

Brand/Manufacturer VIBRO METER / USA
Part Number VM600 RLC16 200-570-000-111
Warranty 12 months
Description Circuit Board
Dimennsions 29x26x10cm
Weight 3.17 kg
Dynamic signal inputs
Filtering : Filtered for protection against electromagnetic interference
(conforms to EC standards).
Refer to the VM600 MPC4 machinery protection card data sheet
for further information.
Buffered dynamic signal outputs
Filtering : Filtered for protection against electromagnetic interference
(conforms to EC standards).
Refer to the VM600 MPC4 machinery protection card data sheet
for further information.
Speed/phase reference inputs
Filtering : Filtered for protection against electromagnetic interference
(conforms to EC standards).
Refer to the VM600 MPC4 machinery protection card data sheet
for further information.
Discrete signal interface (DSI) inputs
Control signal
• Alarm reset (AR) : A closed contact between the DSI AR and DSI RET inputs resets
(clears) the alarms latched by the MPC4/IOC4T card pair.
Note: The alarm reset input (DSI AR) is edge-sensitive and a high-tolow transition is required to activate the reset.
• Danger bypass (DB) : A closed contact between the DSI DB and DSI RET inputs inhibits
(bypasses) the danger relay outputs
• Trip multiply (TM) : A closed contact between the DSI TM and DSI RET inputs multiplies
the alarm levels by a scale factor (software configurable), to
enable adaptive monitoring.
Operating principle : Detection of an open circuit or a closed circuit on the input
Alarm outputs
Alarm relays : 4 per IOC4T card.
The MPC4 card can drive the four local relays on the IOC4T card,
as well the relays on RLC16 relay cards and/or IRC4 intelligent relay
cards using the VM600 rack’s Raw bus or Open Collector (OC) bus.
For IOC4T card relay features, see Relay characteristics on page 4.
For further information on RLC16 or IRC4 relay cards, refer to the
corresponding data sheet.