MVME162-043 Microprocessor Motorola

Description

MVME162-043

If the data in the BBRAM is lost, use the number on the label on backplane

connector P2 to restore it.

The Ethernet transceiver interface is located on the MVME162 main module.

An industry-standard DB15 connector is located on the MVME712 series

transition module.

The MCchip provides support functions for the 82596CA. Refer to the

82596CA user’s guide and to the MVME162 Embedded Controller Programmer’s

Reference Guide for detailed programming information. Refer to the

MVME712-12, MVME712-13, MVME712A, MVME712AM, and MVME712B

Transition Modules and LCP2 Adapter Board User’s Manual or the MVME712M

Transition Module and P2 Adapter Board User’s Manual for the pin assignments

of the transition module Ethernet connectors.

SCSI Interface

The MVME162 supports mass storage subsystems through the industrystandard SCSI bus. These subsystems may include hard and floppy disk

drives, streaming tape drives, and other mass storage devices. The SCSI

interface is implemented using the NCR 53C710 SCSI I/O controller.

Support functions for the NCR 53C710 are provided by the MCchip. Refer to

the NCR 53C710 user’s guide and to the MVME162 Embedded Controller

Programmer’s Reference Guide for detailed programming information. Refer to

the MVME712-12, MVME712-13, MVME712A, MVME712AM, and

MVME712B Transition Modules and LCP2 Adapter Board User’s Manual or to the

MVME712M Transition Module and P2 Adapter Board User’s Manual for the pin

assignments of the transition module SCSI connectors.

MVME162-032

MVME162-012A

MVME162-043