Description
MVME162-432
The MVME162 provides +5 Vdc power to the remote LED/switch connector
(J4) through a 1A fuse (F1) located near J4. Connector J4 is the interface for a
remote control and indicator panel. If none of the LEDs light and the ABORT
and RESET switches do not operate, check fuse F1.
The MVME162 provides +12 Vdc power to the Ethernet transceiver interface
through a 1A fuse (F2) located near diode CR1. The FUSE LED lights to indicate
that +12 Vdc is available. When the MVME712M module is used, the yellow
DS1 LED on the MVME712M illuminates when LAN power is available, which
indicates that the fuse is good. If the Ethernet transceiver fails to operate, check
fuse F2.
The MVME162 provides SCSI terminator power through a 1A fuse (F1) located
on the P2 Adapter Board or LCP2 Adapter Board. If the fuse is blown, the SCSI
device(s) may function erratically or not at all. When the P2 Adapter Board is
used with an MVME712M and the SCSI bus is connected to the MVME712M,
the green DS2 LED on the MVME712M front panel illuminates when SCSI
terminator power is available. If the green DS2 LED flickers during SCSI bus
operation, check P2 Adapter Board fuse F1.
MVME162-430
MVME162-353
MVME162-432
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!
