EPSCPE100-ABAC 1GHz programmable controller

Description

User Features
The PACSystems* RSTi-EP EPSCPE100, is an enhanced
performance standalone 1GHz programmable controller
equipped with 1MB of user memory and four Ethernet ports
to run real time deterministic control applications. LAN1 is
dedicated to highspeed Ethernet and LAN2 comprised of 3
switched ports configurable as either an embedded
Ethernet controller or an embedded PROFINET controller,
which provides the PROFINET functionality and supports
only simplex mode of operation. It is a standalone PLC that
supports distributed I/O. From now on in rest of the
document this controller will be referred to as CPE100.
Figure 1: EPSCPE100
Features at a Glance
The CPE100 is programmed and configured over Ethernet
via GE’s Proficy Machine Edition (PME) software. It can
control/process up to 2K I/O points.
Highlights include:
 A built-in PACSystems RSTi-EP PLC CPU
o User may program in Ladder Diagram,
Structured Text, Function Block Diagram.
o Contains 1Mbytes of configurable data and
program memory.
o Supports auto-located Symbolic Variables that
can use any amount of user memory.
o Reference table sizes include 2k bits for discrete
%I and %Q and up to 2k words each for analog
%AI and %AQ. Bulk memory (%W) also
supported for data exchanges.
o Supports up to 512 program blocks. Maximum
block size is 128KB.
 Supports two independent 10/100 Ethernet LANs. LAN1 has only one port and is
dedicated to highspeed Ethernet and whereas LAN2 comprises of 3 switched
ports configurable as either an embedded Ethernet controller or an embedded

EPSCPE100-ABAC