IS200VSVOH1B IS200VSVOH1BEF IS200VSVOH1BDB Board assembly manufactured by Mark VI

¥8,888.00

SPECIFICATIONS
Part Number: IS200VSVOH1B
Manufacturer: General Electric
Product Type: Servo Control Board
Series: Mark VI
Availability: In Stock

IS200VSVOH1B is a VME Servo Control Board manufactured by General Electric as part of the Mark VI Series used in gas turbine control systems. The four electro-hydraulic servo valves that operate the steam/fuel valves are under the direction of the Servo Control (VSVO) board. Typically, two servo terminal boards are used to separate these four channels (TSVO or DSVO). Using linear variable differential transformers, the valve position is determined (LVDT).

The VSVO executes the loop control algorithm. On the front panel’s J5 plug and the J3/J4 connectors on the VME rack, three cables connect to VSVO. The JR1 connector is used by
TSVO delivers simplex signals, while the JR1, JS1, and JT1 connectors are used to fan out TMR signals. External trips from the protection module are plugged into JD1 or JD2.
IS200VSVOH1B Installation
Turn off the processor rack for the VME.
Place the board in place and use your hands to press the top and bottom levers into the seat of the edge connectors.
Tighten the captive screws on the front panel’s top and bottom.
Cable connections to the TSVO terminal boards are made at the lower J3 and J4 connectors on the VME rack. To secure the cables, they are latching connections. Start the VME rack and look at the diagnostic lights on the front panel.

Category: GE

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Product Description
The IS200VSVOH1B is a board component made by General Electric for the Mark VI. The Mark VI was released by GE as part of their long-running and popular Speedtronic line for gas/steam turbine management, which began in the 1960s when the company released the Mark I system. This line of turbine control has continued development on through to the 2000s with the Mark VI and Mark VIe. The Mark VI includes Ethernet communications capabilities, a PC-based operator interface, and integrated hardware and software that are both designed specifically for turbine control.

The IS200VSVOH1B functions as a Servo Control board. The board drives fuel/steam valves through its control of four electro-hydraulic servo valves. The board also provides pulse rate flow inputs, LVDT excitation, and LVDT position feedback. The IS200VSVOH1B can be used in Triple Redundant systems and also in Simplex systems.

The IS200VSVOH1B is has a single slot front panel attached to the PCB. This panel includes a cable connector (J5) as well as LED indicators for status information. The three LEDs in the front panel include a RUN light (green,) a FAIL light (red,) and a STATUS light. The STATUS light typically is not powered. However, if an alarm condition is present this LED will be powered up and will display as a steady orange.

The IS200VSVOH1B has six connectors, including two backplanes (P1/P2,) and four connectors made with conductive traces (P3 through P6.) The board includes four relays (K1 through K4.) Each of these components has a printed diagram on its top surface. The board is populated with resistors, capacitors, and TP test points. It also has inductor beads (L1-L10.) The board has over seventy integrated circuits.

IS200VSVOH1B

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!