ICS TRIPLEX T8310 Trusted Extender

ICS TRIPLEX T8310

Before installation, visually inspect the module for damage. Ensure that the module housing

appears undamaged and inspect the I/O connector at the back of the module for bent pins.

If the module appears damaged or any pins are bent, do not install the module. Do not try

to straighten bent pins. Return the module for replacement.

Ensure that the module is of the correct type.

Record the module type, revision and serial number of the module before installation.

If the module is to reside in a new chassis, or the system is being configured for the first

time, ensure that the chassis address has been set correctly before installing the modules.

See Expander Chassis Product Description (PD-T8300) for further details.

To install the module:

1. Ensure that the cable assembly is correctly located.

2. Release the ejector tabs on the module using the release key. Ensure that the ejector

tabs are fully open.

3. Holding the ejectors, carefully insert the module into the intended slot.

4. Push the module fully home by pressing on the top and bottom of the module fascia.

5. Close the module ejectors, ensuring that they click into their locked position.