GE IC670MDL930K IC670PBI001 IC693ALG221 modular

GE IC670MDL930K IC670PBI001 IC693ALG221 modular
Module Characteristics
Configuration 6 points – Form A (each point isolated)
2 points – Form C (each point isolated)
Rated Voltage 5/24/125 VDC, 120/240 VAC
Voltage Range 0–130 VDC, 0–265 VAC (47–63 Hz)
Maximum Load Current (resistive) 16 amps per module
Indicators Individual logic side LEDs indicate the status of each output. The
PWR LED indicates the presence of backplane power.
Isolation: User input to logic, user
input to frame ground, group to
group
250 VAC continuous, 1500 VAC for 1 minute. No isolation between
individual points in a group.
Relay Type Fixed coil, moving armature
Current Drawn from BIU Power
Supply
313 mA maximum (see chart on the next page)
Output Characteristics
Maximum Load Current (resistive) 2.0 Amps from 5 to 265VAC
2.0 Amps from 5 to 30VDC
0.2 Amps from 31 to 125VDC
Maximum Inrush 5 Amps for 20mS
Minimum Load Current 10 mA per point
Output Leakage 2 mA at 120 VAC maximum
Response Time-On 10 ms (max)
Response Time-Off 10 ms (max)
Switching Frequency 20 cycles/minute (inductive load)
Contact Type Silver Alloy
Contact Resistance 0.2 (initial) at 1 A, 6 VDC
Contact Life Mechanical: 20 x 10^6 operations
Electrical: 10^5 operations at rated resistive load
Protection (each output) Snubber (R=47.5 ohms, C=0.022 ufd). No fuse
Vibration (this module) IEC68-2-6: 10 to 57 Hz 0.012in displacement (peak to peak)
57 to 500 Hz at 1.5 G