Name: DS200TCQCG1BKG RST overflow plate - Runheng
Brand: GE

DS200TCQCG1BKG RST overflow plate

describe

Part No.: DS200TCQCG1BKG

Product name: module

Manufacturer: GE

Features: available

Inventory: 10 sets

Estimated delivery date: usually within 1-3 days

Shipping weight: 2 Kg

Part Number: DS200TCQCG1BKG

SKU: DS200TCQCG1BKGGBTC

Manufacturer: GE Boards & Turbine Control

Series: Mark V DS200

When the PLC is running, it completes the control task by executing the user program that reflects the control requirements, and many operations need to be performed, but the CPU cannot perform multiple operations at the same time. It can only perform one operation at a time in a time-sharing operation (serial work) manner, one by one in sequence. As CPU’s operation processing speed is very fast, from a macro perspective, the results appearing outside the PLC seem to be completed simultaneously (in parallel). This serial working process is called PLC scanning working mode.

When the user program is executed in the scanning mode, the scanning starts from the first program and executes the user program one by one in the sequence of program storage without interruption or jump control until the program ends. Then scan from the beginning and run repeatedly.

The working principle of PLC scanning is obviously different from that of electrical control. The electrical control device adopts the hard logic parallel working mode. If the coil of a relay is energized or de energized, all normally open and normally closed contacts of the relay will immediately act simultaneously no matter where they are located in the control line; The PLC adopts the scanning mode (serial mode). If the coil of a soft relay is connected or disconnected, all its contacts will not act immediately and will not act until the scanning reaches this point. However, due to the fast scanning speed of PLC, there is usually no difference between the I/O processing results of PLC and electrical control devices.

Add to Quote

Category: GE

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Product Description
The GE RST Overflow Board DS200TCQCG1BKG is populated with 24 jumpers and 3 40-pin connectors. It also has 3 34-pin connectors and 1 16-pin connector. The ID assigned to the 16-pin connector is JC. The IDs assigned to the 40-pin connectors are JFF, JE, and 6PL. The GE RST Overflow Board DS200TCQCG1BKG also is populated with heat sinks that dissipate heat. Consider the following information about the heat sinks before you install and remove the board. The heat sinks protrude from the board and so the board cannot be placed within 3 inches of other boards in the interior of the drive, if the boards are sandwiched together. This is to allow for clearance for the heat sinks and to give the heat sinks the air flow required to dissipate the extra heat. Another consideration is that the heat sinks might damage other boards and components when you arrange the board in the drive. You might accidentally scratch another board or knock delicate components from another board. Also, be careful to avoid scraping the board against other components and knocking off the heat sinks.

The IDs assigned to the jumpers are prefixed with BJ followed by a number. For example, jumpers are assigned IDs BJ1, BJ5, and BJ24. A description of each jumper is contained in the instructions supplied with the board from the factory. And the jumpers are referred to by the jumper ID. When the GE RST Overflow Board DS200TCQCG1BKG is originally installed in the drive the installer moves the jumpers to configure the board to meet the processing needs of the site.

DS200TCQCG1BKG

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!