Name: GE IC697CPX928-CD PLC - Runheng
Brand: GE

GE IC697CPX928-CD PLC

Technical Specifications
Module Type: Central Processing Unit
Number of Slots: 1 (Single slot)
Current Required: 3.1 Amps
Number of Points: 12K inputs and outputs (any mix)
Serial Ports: Three (RS-232 and RS-485)
Supports: IC660/IC661 I/O and IC697 I/O

The GE Fanuc IC697CPX928 module is a CPU module based on the 80486DX4 microprocessor. It is manufactured by GE Fanuc Automation as a member of the Series 90-70 product line and it has a clocked speed of 96 megahertz. This unit also supports the floating-point data as well as 32-bit instructions. The CPU module comes of a medium-speed RAM with a capacity of 6 MB that is backed-up by an integral lithium battery. This battery is replaceable and the replaceable battery is the IC697ACC701 battery. The battery is capable of retaining the data stored in the RAM for a maximum of 6 months. It has a nominal current of 3.1 amperes, with an input voltage rating of 5 volts DC. This module has a forced air-cooling rating of 70 CFM, and an operational ambient temperature ranging from 32 to 140 degrees Fahrenheit. With no air-cooling, the GE Fanuc IC697CPX928 CPU module operates at a temperature range of 32 to 122 degrees Fahrenheit.

Based on the available power supply, the rack fan assemblies that can be installed on the GE Fanuc IC697CPX928 CPU module include 240 Volts AC, 120 Volts AC, or 24 Volts DC rated rack fan assemblies. This CPU module features 3 serial ports which are 2 RS-485 communication ports and 1 RS-232 communication port. The serial ports are used for interfacing with the programming devices for the configuration of the CPU. In addition, there is an optional Ethernet module which can also be installed on to the PLC to enhance the configuration of the GE IC697CPX928 CPU module by using the Ethernet networks. This unit comes with a total of 7 LED indicators which are placed in the front of module to enable various status updates.

Add to Quote

Category: GE

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Product Description

The IC697CPX928 is a Programmable Logic Controller manufactured by GE Automation and Controls. It is designed to fit into a single rack slot and comes with three built-in serial ports. A backplane mounted on the rack allows this device to communicate with several different modules. A run/stop control switch with three positions or specific software running from an attached computer is used to control the IC697CPX928. Seven on-board LED lights display operational status.

Features of this device include a 96MHz 80486DX4 microprocessor, floating point calculations, processor speeds of 0.4 microseconds for each Boolean function, 8K analog I/O, and 12K I/O of any mix. The IC697CPX928 supports several modules, including IC697 LAN interface modules and various display, coprocessor, communications, and link interface modules. IC660/61 bus controllers and IC697 discrete and analog I/O modules are also compatible with this device.

To program this device, connect it to a computer loaded with MS-DOS, Windows 95, or Windows NT. This connection is possible by way of a serial, parallel, or Ethernet interface. For Ethernet connections to the programming computer, special hardware is required. As the IC697CPX928 is programmed via software, hardware setup with DIP switches and jumpers is not required. Device configuration settings can be protected digitally via a password and physically by a keyswitch.

The IC697CPX928 provides six megabytes of user and program data memory. This memory is maintained by a lithium CMOS battery. Up to 256 kilobytes of optional flash memory (NVRAM) is also supported. Operating system firmware is stored in flash memory. Device disassembly or EPROM replacement is not required to update firmware.

In environments where temperatures reach 122 degrees Fahrenheit (50 Celsius), a fan capable of 70 cubic feet per minute (CFM) is required to prevent overheating.

The product manual contains detailed guidelines for installing the IC697CPX928. Rack power should be off before installing. The operation control switch should be in the stop position. The memory protection keyswitch should be in the off position. Place the CMOS battery into one of the battery connection slots. Insert the device into the rack and resume power.

IC697CPX928-CD

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!