TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

Description

Manufacturers

Triconex

Estimated Shipping Size

Dimensions: 5.0″ x 5.0″ x 2.0″

(12.7 cm x 12.7 cm x 5.1 cm)

Weight: 0 lbs 12.0 oz (0.3kg )

Country of Origin: Germany

Ships from Webster NY, USA

The working mode of PLC is scanning plus interruption, which can not only ensure its orderly operation, but also avoid the “risk competition” that often occurs in the relay control system, and its control results are always determined; In addition, it can deal with the control of emergency, which ensures the timely response of PLC to emergency situations and makes PLC work reliably.

TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

In order to monitor whether the PLC operation program is normal, the PLC system is equipped with a “Watching dog” monitoring program. When running the user program, clear the “watchdog” timer and start timing. When the user program runs through a cycle, check the timer’s timing value. In case of timeout (generally no more than 100ms), an alarm will be given. In case of serious timeout, PLC can also be stopped. Users can take corresponding emergency measures according to the alarm signal. If the timing value of the timer does not time out, the start process will be repeated and the PLC will work normally. Obviously, with this “watchdog” monitoring program, the normal operation of PLC user program can be guaranteed, and the “dead cycle” can be avoided, which will affect the reliability of its work.

TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

The PLC also has many instructions to prevent and detect faults, so as to generate a prompt signal of whether the important modules work normally or not. The working condition of PLC and the system controlled by PLC can be monitored by compiling corresponding user programs to ensure its reliable operation.

TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

After PLC is powered on each time, it also needs to run self-inspection program and initialize the system. This is configured by the system program, and the user can not intervene. There is corresponding error signal prompt in case of failure.

TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

It is the powerful reliability measures of PLC in software and hardware that ensure the reliable operation of PLC. Its mean time between failures can reach tens of thousands of hours; The average time to repair after a failure is also very short, which can be a few hours or even minutes.

TRICONEX 9662-610 24 VDC dual terminal panel, 16 points, universal

Someone has done a questionnaire on why to use PLC. In the answer, most users regard the reliability of PLC as the main reason for choosing it, that is, the reliability of PLC as its preferred indicator.

9662-610