TRICONEX 3511 Input module pulse TMR

Description

3511 TRICONEX 3511 INPUT MODULE PULSE 3511

Type TMR, PI

Input Signals 8, non-commoned

Resolution 16 bits

Accuracy 1,000 Hz to 20,000 Hz, ± 0.01%

Input Characteristics (AC coupled, balanced differential)

Update Rate 25 ms, typical

Impedance (load) > 8 KW, 20 KW typical

Common Mode Range -100 VDC to +100 VDC peak-to-peak

Normal Mode Range 1.5 V to 200 V peak-to-peak

Overrange Protection ±150 VDC, continuous

Hysteresis 150 millivolts, typical

Wave Shape Sine, square, pulse, etc.

Duty Cycle 10% to 90%

Frequency 20 Hz to 20,000 Hz

Current Range 0-20 mA (250-ohm shunt)

Diagnostic Indicators (ON=true)

Input Status 1 per point

Module Status PASS, FAULT, ACTIVE

Color Light Purple

MFG: TRICONEX, Made in USA

The control scale represents the PLC control capability, which can control how many input and output points and how many analog circuits.

TRICONEX 3511

The scale of control is related to speed. Because of its large scale, long user programs and slow execution of instructions, it is bound to prolong the PLC cycle time and the response of PLC to input signals. In order to avoid this situation, the working speed of PLC should be fast. Therefore, the working speed of large PLC is always faster than that of small PLC.

TRICONEX 3511

The control size is also related to the size of the memory area. Large scale and long user program require larger user storage area. At the same time, there are many points, and the input and output signal area (input and output relay area or input and output mapping area) of the system’s memory is also large. This area is large, and correspondingly the number of internal devices (see the explanation below) will also increase, which requires a larger system storage area.

TRICONEX 3511

The control scale is also related to the number of input and output circuits. If the control scale is 1024 points, there must be 1024 I/O circuits. These circuits are integrated in I/O modules, and there are always several I/O points for each module. Therefore, it has a large scale and uses many modules.

TRICONEX 3511

The control scale is also related to the PLC instruction system. Large-scale PLC has a large number of instructions and strong functions, so it can meet the need of controlling the system with a large number of points.

TRICONEX 3511

The control scale is an index that restricts other performance indicators of PLC; PLC is also divided into micro, small, medium, large and extra-large types