The ABB DO810 3BSE008510R1 is a digital output processor module commonly used in industrial automation and control systems. The following is an introduction to the detailed parameters, specifications, dimensions, weight, series, features and functions of the module:
Parameters and specifications:
Digital output: with 16 digital output channels.
Output voltage: The output voltage range is 10 to 30 volts.
Output current: The maximum continuous output current is 0.5A.
Protection: The output is protected against short circuit, overvoltage and overheating.
Output grouping: The output is divided into two separate groups, each with eight output channels and one voltage monitoring input.
Size and weight:
Dimensions: The net depth/length of the product is 102 mm, the net height is 119 mm, and the net width is 45 mm.
Weight: The net weight of the module is 0.2 kg, and there is also information indicating that its weight is 0.235 kg.
Features:
Programmability: The user can configure and control the output signal of the module through programming.
Multiple output types: Support a variety of output types, such as relay output, transistor output, etc., to meet the needs of different application scenarios.
Communication interface: supports a variety of different communication interfaces, such as Ethernet, serial port, CAN bus, etc., to facilitate users to connect various devices and sensors.
Stability and reliability: The use of high-quality components and manufacturing processes to ensure the stability and reliability of the product, with long life characteristics.
Diagnostic functions: Typically have diagnostic functions that monitor output status, detect faults and provide alerts that help with rapid troubleshooting and maintenance.
Functions:
Industrial automation System integration: The DO810 module may be integrated into industrial automation systems as part of the control system for the control of digital output devices in the production process.
Control digital signal: This module is responsible for converting the digital signal generated by the control system into the corresponding output to control external devices or actuators.