ABB CI871 is a communication interface module widely used in industrial automation. The following is a specific introduction of its parameters, specifications, dimensions, weight, series, characteristics and functions according to the available information:
Parameters and specifications:
Communication protocol: Support PROFINET IO communication protocol, which is an Ethernet communication protocol widely used in industrial automation.
Communication speed: Supports 10 Mbps and 100 Mbps communication speeds, which are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power Supply: 24VDC power supply is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
Size and weight:
Dimensions: The module measures 59 x 185 x 127.5 mm (2.9 x 7.3 x 5.0 inches). Another description is 110mm x 360mm x 68mm.
Weight: 500g (700g with packaging). It is also described as about 2KG.
Series:
The CI871 is part of ABB’s Distributed control System (DCS), which is used in a wide range of industries, including power, metallurgy and petrochemicals.
Features:
High reliability: The module has the characteristics of high reliability, ease of use and scalability, and is suitable for various industrial automation application scenarios.
A variety of communication interfaces: it usually has a variety of communication interfaces, such as Ethernet, serial communication, etc., which can facilitate data exchange and communication with other devices or systems.
Status indicator: Has a status indicator, when the normal operation, the indicator is green; If an abnormal fault occurs, the indicator will turn red.
Protection level: According to EN60529 and IEC 529 standards, its protection level is IP20, with a certain dust and water resistance, but not suitable for harsh industrial environments.
Functions:
Communication interface: As a PROFINET IO communication interface module, the CI871 allows devices or systems to connect to the PROFINET IO network via Ethernet to achieve data transmission and exchange.
Industrial Automation: The module is suitable for various industrial automation application scenarios, such as process control, machine control, automated production lines, etc., to improve production efficiency and system reliability.