07AC91F GJR5252300R3101 modular

Product Details:

Brand Name ABB

Model 07AC91

Product ID GJR5252300R0101

Condition New

Gross Weight 4.4 lbs / 70.5 oz / 2kg

Packing Size 10.0″ x 4.0″ x 6.0″ (25.4 cm x 10.2 cm x 15.2 cm)

Country of Origin Sweden

Lead Time In Stock

Payment T/T

Sales Price Inquiry

Color Depends on material

Warranty 12 months

07AC91F GJR5252300R3101 modular

● The power line, control line and PLC power line and I/O line shall be wired separately, and the isolation transformer shall be connected with PLC and I/O with double rubber wires. Separate the IO line and high-power line of PLC. If it must be in the same slot, separate the AC line and DC line. If conditions permit, the slot routing is the best, which can not only make it have the largest possible space distance, but also reduce the interference to the minimum.

07AC91F GJR5252300R3101 modular

● PLC shall be far away from strong interference sources such as electric welding machine, high-power silicon rectifier and large power equipment, and shall not be installed in the same switchgear with high-voltage electrical appliances. The PLC in the cabinet shall be away from the power line (the distance between the two shall be greater than 200mm). Inductive loads installed in the same cabinet with PLC, such as the coils of high-power relays and contactors, should be connected in parallel with RC arc suppression circuit.

07AC91F GJR5252300R3101 modular

● The input and output of PLC should be wired separately, and the switching value and analog value should also be laid separately. The transmission of analog signal shall adopt shielded wire, and the shielding layer shall be grounded at one or both ends, and the grounding resistance shall be less than 1/10 of the shielding layer resistance

07AC91F GJR5252300R3101 modular

● The AC output line and DC output line should not use the same cable, and the output line should be far away from the high-voltage line and power line as far as possible to avoid parallel.