ABB KUC711AE101 3BHB004661R0101 （Including 7 small cards）

Description

ABB KUC711AE101 3BHB004661R0101 （Including 7 small cards）The I/O response time of PLC includes input circuit delay, output circuit delay and time delay caused by scanning mode (generally 2~3 scanning cycles). For the system controlled by switching value, PLC and I/O response time can generally meet the requirements of the actual project, and I/O response can not be considered. But for analog control systems, especially closed-loop systems, this problem should be considered.

Select type according to the characteristics of output load

Different loads have corresponding requirements for PLC output mode. For example, for the inductive load that is frequently switched on and off, the transistor or thyristor output type should be selected instead of the relay output type. However, the relay output type PLC has many advantages, such as small conduction voltage drop, isolation effect, relatively cheap price, strong ability to withstand transient overvoltage and overcurrent, flexible load voltage (AC, DC) and wide range of voltage levels. Therefore, relay output type PLC can be selected for AC and DC loads with infrequent action.

Choice of online and offline programming

Offline programming indicates that the host computer and the programmer share a CPU, and the programming, monitoring and operation status of PLC can be selected through the programmer’s mode selection switch. In the programming state, the CPU only serves the programmer and does not control the site. This is the case for special programmer programming. Online programming means that the host computer and the programmer each have a CPU. The host computer’s CPU completes the control of the site and communicates with the programmer at the end of each scan cycle. The programmer sends the modified program to the host computer, and the host computer will control the site according to the new program in the next scan cycle. Computer aided programming can realize both offline programming and online programming. Online programming requires the purchase of computers and the configuration of programming software. The programming method used should be determined according to the needs.

New stock, sufficient stock

Low price clearance, first come, first served

One year warranty, dedicated after-sales service

Main business

① Allen-Bradley (American AB)

② Schneider

③ General electric

④ Westinghouse

⑥ Sales ABB Robots FANUC RobotSKAWA Robots、KUKA Robots、

⑦ Westinghouse

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module), Invensys Triconex

MOOG, Simatic CNC system, etc.

⑩ Bosch Rexroth

Shanxi Runsheng – provides control system components and products to serve the control system installed by users. Distributed control system, programmable controller, panel controller and driver, we provide fast and convenient spare parts supply in more than 65 different countries around the world.

Our service standard reduces the downtime and maintenance cost of customers, reduces the operation failure of all industrial machinery and production equipment, and extends the service life of the control system!