ABB MSR04X1

Description

The TM117-DMX is designed for use as a multi-channel display driver.
The module has the capability of driving 64 display elements from a single communications
interface. It’s design incorporates a dual redundant configuration to ensure high availability.
The input interface of the TM117-DMX is a dual serial communications link, driven from the
MSR04X1 serial I/O card.
The TM117-DMX modules are typically used to drive LED indicators on control room operator
monitor panels.
Model TM117-DMX
Serial interface RS423 /422
Display drivers 64 open collector, 50mA per output, the total output
current must not exceed 3A @24Vdc
Watchdog outputs On board LED and volt free changeover contacts
Wiring connections Serial data: 9 pin D-type connectors (2 male, 2 female)
All other: Screw terminal
Power requirements
(2 daughterboards)
9.6W maximum @ 18Vdc to 32Vdc
Comms cable 2-core twisted pair, maximum length 1km
Sync cable Miniature coaxial screened cable, wire ended (4Hz
signal)
Overall size (mm) 425L x 153W x 45D including daughterboards, mounting
clearances and pillars
Weight 0.71kg

The maximum ambient temperature measured at the hottest point within the Triguard system
shall not be greater than 60 degrees centigrade.
Temperature operating: +5°C to 60°C
Temperature storage: -25°C to +70°C
Humidity 5% to 95% non-condensing at ambient <40°C EMC/RFI Immunity Tested and certified to IEC 1131-Part 2 1994 Vibration/Shock Tested and certified to IEC 1131-Part 2 1994 DS200IQXSG1A DS200ITXDG1A DS200ITXSG1A DS200KLDAF1DAA DS200KLDAF1EAB DS200KLDCF1AAB DS200KLDCG1A DS200LDCCH1A DS200LMGCF1AEA DS200LMGQF1ADD DS200LPPAG1A DS200LRPAF1ACC DS200LRPAG1A DS200LRPBG1A DS200LSTCF1ACD DS200LSTCF1ACE DS200LSTQF1ACA