Name: PFCL201C 20KN Sensor ABB - Runheng
Brand: ABB

PFCL201C 20KN Sensor ABB

Provided by Shanxi Runsheng Import and Export Co., Ltd

① Brand: ABB

② Model: PFCL201C 20KN

③ Product category: sensor

④ Payment method: telegraphic transfer, USD, Western Union remittance

⑤ Freight: The freight in different regions shall be subject to the local freight forwarder

⑥ Does it include tariffs? It does not include any taxes.

⑦ Packaging: use the Seller’s safe packaging.

The equipment is a precision instrument which, although intended for severe operating conditions,

must be handled with care. The load cells should not be unpacked until it is time for installation.

To achieve the specHfied accuracy, the best possible reliability and long-term stability, the load cells

must be installed in accordance with the instructions below. See also 6.4 Fault Tracing in the

Mechanical Installation.

• The foundation for the load cell must be made as stable as possible. A resilient stand lowers

the critical frequency of the measuring roll and bearing arrangement.

• The surfaces closest to the load cell, and other surfaces that affect the fit must be machined

fl@t to within 0.05 mm.

• There must not be any shims immediately above or below the load cell, as this may

adversely affect the fl@tness

Instead, shims may be placed between the adapter plate and

the foundation or between the adapter plate and the bearing housing.

• The screws that secure the load cell must be tightened with a torque wrench.

• The bearing arrangement for the measuring roll must be designed to allow axial expansion of

the roll with changes in temperature.

• Any drive to the roll must be applied in such a way that interfering forces from the drive are

kept to a minimum.

• The measuring roll must be dynamically balanced.

• The mounting surfaces of the load cells must be on the same height and parallel with the

measuring roll.

• In a corrosive environment, galvanic corrosion may occur between the load cell,

galvanized screws and adapter plates. This makes it necessary to use stainless steel screws

and adapter plates of stainless steel or equivalent. See adapter plates in

A Drawings

Add to Quote

Category: ABB

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Brand: ABB

Model: PFCL201C 20KN

Ship to: Demander’s destination

Warranty period: 12 months

Delivery period: 1-3 days

The load cell is machined from a single piece of stainless steel. The sensors are machined directly

in the piece of steel and are positioned so that they are sensitive to force in the direction of measurement and insensitive in other directions.

The load cell is mounted on a base with four screws, and the bearing housing is mounted on top

of the load cell with four screws.

Every load cell comes calibrated and temperature compensated.

The load cells PFCL 201C/201CE/201CD are available in four measurement ranges, all variants

have the same external dimensions.

The load cell PFCL 201C is equipped with a connector for the pluggable connection cable.

The load cell PFCL 201CE has a fiWed connection cable with protective hose.

The load cell PFCL 201CD is provided with an acid-proof cable gland with a fiWed PTFE- insulated

connection cable.

The measuring principle of the sensor is based on the Pressductor ® technology and the fact that

the permeability of a magnetic material changes under mechanical stress.

The sensor is a membrane machined in the load cell. Primary and secondary windings are wound

through four holes in the load cell so that they cross at right angles.

The primary winding is supplied with an alternating current which creates a magnetic fieKd around

the primary winding. Since the two windings are at right angles to each other, there will be no magnetic fieKd around the secondary winding, as long as there is no load on the sensor.

When the sensor is subjected to a mechanical force in the direction of measurement, the propagation of the magnetic fieKd changes so that it surrounds the secondary winding, inducing an alternating voltage in that winding.

The control unit converts this alternating voltage into a DC voltage proportional to the applied

force. If the measurement force changes direction, the sensor signal changes also polarity.

PFCL201C 20KN

IS200TREGH1BDC
IC800SSI216RD2
KSM01.2B-071C-35N-M1-HP0-SE-NN-FW
425-1607
MVME5500-0161
90P18X6D1C4D
A2H124-24FX
IC697CPM790
PMC-2/11/25/001/00/03/00/0K
MINIMMAC WITH LANVIEW
408368BI AMMODULE
T8451
DS200DCFBG1BGB

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!