FOXBORO RH916XZ

Description

FOXBORO RH916XZ
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
The output voltage of the FPS240-24 (P0924SM) and FPS120-24 (P0924SL) power
supplies is set to 24.1 V by default. This voltage must not be changed. Do not expose or
turn the output voltage potentiometer on these power supplies. Doing so will invalidate the
warranty for these power supplies and any equipment connected to them and may result in
faulty equipment operation. Foxboro provides no guarantee for any 200 Series subsystem
equipment’s operation if this output voltage is changed.
Failure to follow these instructions will result in death or serious injury.
Input
Specifications
FPS240-24 (P0924SM)
• Absolute Input Voltage Range:
85 to 276 V ac and 88 to 187 V dc
• Input Frequency:
47 to 63 Hz
• Nominal Input Current:
2.22/1.22 A at 120/230 V ac
• Efficiency (at Maximum Power, 10A, 24V):
90%+ typical
• Inrush Current:
4/7 A, at 120/230 V ac (peak at cold start)
• Input Transient Protection:
Included
FPS120-24 (P0924SL)
• Absolute Input Voltage Range:
85 to 264 V ac and 88 to 360 V dc
• Input Frequency:
47 to 63 Hz
• Nominal Input Current:
1.10/0.62 A at 120/230 V ac
• Efficiency (at Maximum Power, 10A, 24V):
90%+ typical
• Inrush Current:
9/11 A, at 120/230 V ac (peak at cold start)
• Input Transient Protection:
Included
Protection
Features • Overvoltage Protection:
Factory set at 32-36 V dc
• Isolation Resistance:
500 V ac input to output
• Over Current Protection:
Support loads with a higher short-term power requirement without damage or shutdown
for up to four seconds
Vibration 2 g (17.8 to 500 Hz)
Regulatory
Compliance:
Electromagnetic
Compatibility
(EMC)
• European EMC Directive 2014/30/EU
Meets the requirements of EN 61000-6-1:2007, EN 61000-6-2:2005/AC:2005, EN
61000-6-3:2007 + A1:2011/AC:2012, EN 61000-6-4:2007 + A1:2011
Regulatory
Compliance:
Product Safety
• Underwriters Laboratories (UL) and CSA for U.S. and Canada
Certified as suitable for Class 1 Division 2 Groups A, B, C, D Hazardous Locations,
Temperature Code T4 when connected to specified Foxboro processor modules as
described in the Standard and Compact 200 Series Subsystem User’s Guide
(B0400FA).
• European Low Voltage Directive 2015/35/EU and Explosive Atmospheres (ATEX)
Directive 2014/34/EU for use in Zone 2 Category 3G Hazardous Locations II 3G Ex nA
nC II T4 Gc