DS200IQXSG1AAA Inverter buffer plate

Description

Product Description
The GE Inverter Snubber Board DS200IQXSG1AAA features 8 terminal connectors. The terminals are labeled E1 through E8. The GE Inverter Snubber Board DS200IQXSG1AAA also contains 1 8-pin connector and 1 film capacitor mounted on the board. The board is one of multiple boards installed in the board cabinet. The dimensions are 6.25 by 5 inches and the four holes in the corners align with matching installation holes in the board rack. If new screws are not available, use the same screws that secured the old board.

Because of the heat generated by the boards and the moving parts in the drive, cooling is an important consideration when the drive is installed. The drive must have a source of clean air that can freely flow through the drive to keep the components within the allowed temperature range. The drive is designed so that cool and clean air enters the drive at the bottom and rises through the interior of the drive. It passes around and over the components and draws heat away from the drive.

Another consideration is that the drive not be near other equipment that generates heat and that the walls surrounding the drive are not heated by devices on the other side of the walls.

If the drive become too hot and exceeds the temperature range, an over temperature condition is detected and the drive will automatically stop. This safety features will prevent damage to the components. It also prevents a fire hazard from developing.

DS200IQXSG1AAA