GE DS215DMCBG1AZZ03A

Description

DS215DMCBG1AZZ03A Technical Specifications
Manufacturer GE General Electric
Part Number DS215DMCBG1AZZ03A
Product Type DMCBG1 & FW
Series Mark V
Product Description
DS215DMCBG1AZZ03A MK V GE Speedtronic Drive Board

The DS215DMCBG1AZZ03A is a board component manufactured by GE for use within their MKV Speedtronic system. The MKV was designed for control of gas and steam turbine systems, and while MKV board components are no longer manufactured by the original manufacturer, they can be found here at AX Control as reconditioned and fully tested units. The DS215DMCBG1AZZ03A is a Drive board. It offers updated hardware and/or firmware as compared to a like-named DS200 board.

The DS215DMCBG1AZZ03A is a heavily populated board with the following specifications:
It has five vertical cable connectors. This includes four male and one female connector.
It has three vertical header connectors.
It has three stab-on connectors.
It has over twenty jumper switches.
It has a reset switch located in its upper left quadrant.
It has LED indicators.
It has an inductor coil.
It has TP test points for checking board voltages.
It has over fifty-five integrated circuits. This includes oscillating chips, field programmable gate arrays, and EPROM chips for the storage of data.
It has several fuse components.
It is populated by two auxiliary boards. This includes one vertically mounted board and one horizontally mounted board. Both boards are located in the bottom left corner.

The DS215DMCBG1AZZ03A uses resistor network arrays, transistors, and various capacitors, diodes, and resistors. The board is marked for alignment along two of its edges using lettering and alignment marks and notches. It is drilled in the board corners, in the center of the board, and has additional drill holes along the board edges.