GE DS215KLDCG1AZZ03A

Description

roduct Description
The DS215KLDCG1AZZ03A is a PC Board created by General Electric for its Speedtronic Mark V turbine control systems.

The DS215KLDCG1AZZ03A is a large printed circuit board. It weighs roughly 1.07 lbs.

There are many components that make up the DS215KLDCG1AZZ03A. There are factory drilled holes on the corners and in the center of the sides of the board. The holes can be used to help mount the board. On the top side of the board is a small yellow capacitor and a larger yellow capacitor. There are twenty-one inseparable assemblies that make up the majority of the top of the board. There are six integrated circuits on the top half of the board, three yellow resistor networks, and two additional yellow capacitors. There are a total of 32 white display lamps on in the middle and bottom half of this board. There is an induction coil on the right-center side of the board that has a transistor on its left and right side. On the bottom half of the board are twelve integrated circuits with two EPROMS. There are also nineteen yellow resistor networks on the bottom half of the board. There are six large resistors and many diodes on the bottom half of this board. There are three relays on the bottom of the board and a 40-pin male connector.

DS200TCDAF1ACM
DS200MSTQF1BFC
FM020
DS200TCPSG1A
DS200TCPSG1APE
DS200TCPSG1ARE
DS200TCQAF1AEC
DS200TCQAF1AED
DS200TCQAF1AEE
DS200TCQAF1AFA
DS200TCQAF1AFB
DS200TCQAF1AFC
DS200TCQAF1AFE
DS200TCQAF1AFF
DS200TCQAF1BBC