GE HE693RTD600

Description

GE HE693RTD600

GE HE693RTD600

GE HE693RTD600

The RTD Input Modules allow RTD temperature sensors to be directly connected to the PLC

without external signal processing (transducers, transmitters, etc.). All analog and digital processing of

the RTD signal is performed on the module, and temperature values in 0.5°C or 0.5°F increments

(RTD600) or 0.125°C, 0.1°C or 0.1°F (RTD601) increments are written to the 90-30 %AI input table. All

modules feature six channels, and support PT-90 (MIL-7990); PT-100E, PT-100C, and PT-100Z; Ni-120,

Cu-10, Cu-50, Cu-53, Cu-100, Pt-1000, TD5R and Linear Resistance.

Power Consumption

(Typical) 75mA @ 5VDC Number of Channels 6

Types

Supported

Pt-100E

alpha=.00385 -100 to 850C I/O Points Required 6%AI

Pt-100C

alpha=.003902 -100 to 650C Input Impedance >1000 Meg 

Pt-100Z

alpha=.03906 -200 to 300C Fault Protection Zener Diode Clamp

Pt-1000 -100 to 850C A/D Conversion Type 16 bit, Integrating

Cu-10 -200 to 260C Update Time 50 Channels per second

Cu-50 0 to 100C

Average RTD current,

PT-100 330 microamps

Cu-53 -200 to 260C

Channel to Channel

Tracking 0.1C

Cu-100 -200 to 200C Resolution 0.5C or 0.5F

0.125C,

0.1C,or0.

1F

Ni-120 -100 to 270C Accuracy

 0.5C typical,

 1.0C for Cu-10 and

TD5R

Linear 0 to 200 Operating Temperature 0 to 60C (32 to 140F)

TD5R -40 to 150C Relative Humidity 5% to 95% non-condensing

Pt-90

(MIL-7990) -50 to 200C

Platform Support

(Hardware Revision)

Rev R and

Prior

Later

Revisions

90-30 Only 90-30 and

RX3i

Platforms