GE IC660BBD101

Description

The 115VAC Low-leakage I/O Block (IC66*BBD101) is an intelligent,
configurable module that interfaces discrete sensors and actuators
to a communications bus. The block has eight identical 115VAC
circuits. Each circuit can be used as either an input or an output.
115V 50/60 Hz
In/Out
Features
Block features include:

Selectable input Filter Time from 10ms to 100ms.

Output feedback for monitoring.

Output powerup defaults.

Outputs hold last state or default.

Pulse Testing for outputs.

Bus Switching Module control.
Control power for the block is tapped off the input/output device
voltages wired to the terminals. No separate block power supply is
needed.
Each circuit has electronic fusing that shuts down the circuit in 5ms
if output current exceeds 30 Amps with the output turned on, or 20
Amps after 2 cycles. The circuit is easily restored by command from
a Hand-held Monitor or the CPU.
Block diagnostics include:

Overtemperature

Failed Switch

Open Wire for tristate inputs

Overload Detection and Shutdown

No-load Detection
Fault reporting can be enabled or disabled circuit by circuit.
Using this Datasheet ____________________________
This datasheet summarizes information about block installation,
configuration, and diagnostics.
Your primary reference should be the Discrete and Analog Blocks
User’s Manual. It includes detailed instructions for block installation
and configuration.
For additional information about systems and communications,
including bus specifications, refer to the I/O System and