GE IC687BEM713

Description

GE IC687BEM713
Features
D Required for FIP Redundant Systems
D Two Bus Transmitter Modules required per system (in
dual backplane redundancy rack)
D Uses a single VME width slot
D Three LED indicators provide module, programmer
port, and expansion port status
D No DIP switches to set, easy software configuration
into PLC system
D High Performance Parallel Programmer Interface
Functions
The IC687 Bus Transmitter Module (BTM) is used in a
FIP single rack redundancy system. It provides a path for
Redundancy communications when connected to the Redundancy Communications Module (RCM) in the other
half of the two-section redundancy rack. Each section of
this rack requires a Bus Transmitter Module and a Redundancy Communications Module. It also provides a high
performance parallel interface to the programming device.
The module occupies a single VME width slot and has
two connectors. The top one is for attachment to the programming device. The bottom one is for connection to
the Redundancy Communications Module in the other
section of the redundancy rack through the BTM to RCM
cable, IC697CBL803.
Three green LEDs provide status indication of each port
and module status.
The BTM must be configured into the FIP redundancy
system using the MS-DOSr or Windowsr programming
software configuration function.

IS200STCIH6A
IS200STTCH2A
IS200STTCH2A
IS200TBAIH1A
IS200TBAIH1A
IS200TBAOH1B
IS200TBCIH1B
IS200TBCIH1BBC
IS200TBCIH1BCD
IS200TBCIH1BCE
IS200TBCIH1C