GE IC697PWR748

① Brand: GE

② Model: IC697PWR748

③ Inventory quantity: 6

④ Color: new

⑤ Freight: according to different local freight forwarders, the freight in different regions shall prevail.

⑥ Include tariff or not: do not include any taxes

⑦ Packaging: use the Seller’s safe packaging

Operation of the Power Supply

This Power Supply Module operates from a 48 VDC

nominal line. The power supply can accept an input

voltage range of from 35 to 60 VDC.

Overvoltage Protection

The power supply includes an electronic overvoltage

protection circuit. This circuit will clamp the output if

the 5 V bus exceeds 6.7 volts. External overvoltage on

the output will not cause the power supply fuse to

open. However, if an internal fault in the power supply

caused the overvoltage condition, the fuse may open.

Replace this fuse with a 5 amp, 250 volt 5×20 mm fuse.

Overcurrent Protection

The power supply provides an electronic overcurrent

limit for each of the three outputs (26 amps for +5V, 4

amps for +12 V, and 2 amps for –12 V (all maximum)). If the maximum current rating is exceeded,

the output voltage will drop.

It will remain in that state until the load is either removed or reduced. A current overload (including a

short circuit condition) will not cause the fuse to open.

Temperature Derating

For operation at ambient temperatures that exceed

50C (122F), maximum output power must be derated as shown in the derating curve.