GE IC698CPE020

Description

GE IC698CPE020
Features
▪ Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user
memory.
▪ Provides access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram.
▪ Supports auto-located Symbolic Variables that can use any amount of user memory.
▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for
analog %AI and %AQ.
▪ Supports Series 90-70 discrete and analog I/O, communications, and other modules. For a
list of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223.
▪ Supports all VME modules supported by Series 90-70.
▪ Supports RX7i data monitoring over the web. Allows a combined total of up to 16 web server
and FTP connections.
▪ Supports up to 512 program blocks. Maximum size for a block is 128KB.
▪ Test Edit mode allows you to easily test modifications to a running program.
▪ Bit-in-word referencing.
▪ Battery-backed calendar clock.
▪ In-system upgradeable firmware.
▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232
Ethernet station manager serial port.
▪ The embedded Ethernet interface provides:
 Data exchange using Ethernet Global Data (EGD)
 TCP/IP communication services using SRTP
 Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client
 Full programming and configuration services
 Comprehensive station management and diagnostic tools
 Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network
switch providing auto-negotiated network speed, duplex mode, and crossover detection.
 User-configurable Redundant IP address
 Time synchronization to SNTP time server on Ethernet network (when used with
Release 5.00 or later CPU module).