IC695CPU320-HS Module GE

Description

The PACSystems* RX3i CPU can be used to perform real time control
of machines, processes, and material handling systems. The CPU
communicates with the programmer and HMI devices via a serial
port using SNP Slave protocol. It communicates with I/O and smart
option modules over a dual backplane bus that provides:
▪ High-speed PCI backplane for fast throughput of new advanced
I/O.
▪ Serial backplane for easy migration of existing Series 90*-30 I/O.
Features
▪ Contains 64 Mbytes of battery-backed user memory and
64 Mbytes of non-volatile flash user memory.
▪ Provides access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, Structured Text, Function
Block Diagram, and C. Refer to PACSystems RX7i & RX3i CPU
▪ Supports auto-located Symbolic Variables that can use any
amount of user memory.
▪ Reference table sizes include 32Kbits for discrete %I and %Q
and up to 32K words each for analog %AI and %AQ.
▪ Supports most Series 90-30 modules and expansion racks. For a
list of supported I/O, Communications, Motion, and Intelligent
modules, refer to the PACSystems RX3i System Manual
▪ Supports up to 512 program blocks. Maximum block size is
128KB.
▪ CPU firmware may be upgraded in the field.
▪ CPU supports firmware upgrades of modules in its backplane.
▪ Two serial ports: an RS-485 serial port and an RS-232 serial port.
▪ Ethernet communications via the rack-based Ethernet Interface
module (IC695ETM001). For details on Ethernet capabilities, refer
to PACSystems RX7i & RX3i TCP/IP Ethernet Communications
User Manual, GFK-2224.
▪ Time Synchronization to SNTP Time Server on Ethernet network
when used with Ethernet Release 5.0 or later.
▪ Compliant with EU RoHS Directive 2002/95/EC using the following
exemptions identified in the Annex: 7(a), 7(c)-I, & 7(c)-III.

IC695CPU320-HS