Name: IC698CPE030 CPU PLC - Runheng
Brand: GE

IC698CPE030 CPU PLC

IC698CPE030 CPU PLC
Battery: Memory retention For battery selection, installation and estimated life, refer to the
PACSystems Controller Battery and Energy Pack Manual, GFK-2741.
Program storage Up to 64 Mbytes of battery-backed RAM
64 Mbytes of non-volatile flash user memory
Power requirements: CPE030
CPE040
+5 VDC: 3.2 Amps nominal
+12 VDC: 0.003 Amps nominal
-12 VDC: 0.003 Amps nominal
+5 VDC: 6.8 Amps nominal
+12 VDC: 0.003 Amps nominal
-12 VDC: 0.003 Amps nominal
Operating temperature: CPE030
CPE040
0 to 50°C (32°F to 122°F)
0 to 60°C (32°F to 140°F) with fan tray
0 to 60°C (32°F to 140°F), fan tray required
Boolean execution speed, typical: CPE030
CPE040
0.069ms per 1000 Boolean contacts/coils
0.02391ms per 1000 Boolean contacts/coils
Time of Day Clock accuracy Maximum drift of ±2 seconds per day
Elapsed Time Clock (internal timing) accuracy ±0.01% maximum
Embedded communications RS-232, RS-485, Ethernet interface
Serial Protocols supported Modbus RTU Slave, SNP, Serial I/O
Ethernet Ports Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet
interface
VME Compatibility System designed to support the VME64 standard ANSI/VITA 1
Program blocks Up to 512 program blocks. Maximum size for a block is 128KB.
Memory
(For a detailed listing of memory areas, refer to
the CPU Reference Manual, GFK-2222.)
%I and %Q: 32Kbits for discrete
%AI and %AQ: configurable up to 32Kwords
%W: configurable up to the maximum available user RAM
Managed memory (Symbolic and I/O variables combined):
configurable up to 10 Mbytes
Ethernet Interface Specifications
Web-based data monitoring Up to 16 web server and FTP connections (combined)
Ethernet data rate 10Mb/sec and 100Mb/sec
Physical interface 10BaseT RJ45
WinLoader support Yes
Number of EGD configuration-based pages 255
Time synchronization SNTP
Selective consumption of EGD Yes
Load EGD configuration from RX7i to
programmer
Yes
Remote Station Manager over UDP Yes
Local Station Manager (RS-232) Dedicated RS-232 port
Configurable Advanced User Parameters Yes

Add to Quote

Category: GE

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!

Description

Features
▪ Contains 64 Mbytes each of battery-backed user memory and non-volatile flash user memory for
user data (program, configuration, register data, and symbolic variable) storage.
▪ Access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram.
▪ Auto-located Symbolic Variables that can use any amount of user memory.
▪ Support for Series 90-70 discrete and analog I/O, communications, and other modules. For a list
of modules supported, refer to the PACSystems RX7i Installation Manual, GFK-2223.
▪ Support for all VME modules supported by Series 90-70.
▪ Rx7i data monitoring over the web. Allows a combined total of up to 16 web server and FTP
connections.
▪ Up to 512 program blocks. Maximum size for a block is 128KB.
▪ Test Edit mode that allows you to easily test modifications to a running program.
▪ Bit-in-word referencing
▪ Battery-backed calendar clock.
▪ CPU and module firmware upgrades via Winloader through CPU’s RS-232 or RS-485 serial port.
▪ Three isolated serial ports: an RS-485 serial port, an RS-232 serial port, and an RS-232 Ethernet
station manager serial port.
▪ An embedded Ethernet interface with:
 Data exchange using Ethernet Global Data (EGD)
 TCP/IP communication services using SRTP
 Support for SRTP Channels, Modbus/TCP Server, and Modbus/TCP Client
 Full programming and configuration services
 Comprehensive station management and diagnostic tools
 Two full-duplex 10BaseT/100BaseT/TX (RJ-45 Connector) ports with an internal network
switch providing auto-negotiated network speed, duplex mode, and crossover detection.
 User-configurable Redundant IP address
 Time synchronization to SNTP time server on Ethernet network (when used with Release
5.00 or later CPU module).

IC698CPE030

Email: Jiedong@sxrszdh.com
Phone: +86 15340683922
Sales:Wu Jiedong

Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!