IS200TVIBH2BBB GE

Description

• IS200TVIBH2BBB GE Product Description:
• The IS200TVIBH2BBB is a temperature sensor or transducer from GE’s Industrial Solutions segment. This sensor is specifically designed for use in industrial environments, where accurate and reliable temperature monitoring is essential for various automation and control applications. The model name suggests that it offers temperature sensing capabilities with features such as remote communication and possibly digital output.
• Product Parameters of IS200TVIBH2BBB:
• Temperature Range: Defines the minimum and maximum temperatures that the sensor can measure without exceeding its operational limits.
  Accuracy: Specifies the degree of precision with which the sensor measures temperature, indicating the closeness of its measurements to the actual temperature.
  Response Time: Indicates the time it takes for the sensor to reach a stable temperature measurement after a change in temperature occurs. This parameter is important for applications where fast temperature response is required.
  Output Type: Describes the type of signal output generated by the sensor, such as analog or digital. This determines how the sensor communicates temperature data to other devices or systems.
  Power Requirements: Specifies the voltage and current ratings required to power the sensor, ensuring its proper operation.
  Communication Interface: Details the type of communication interface used by the sensor for remote monitoring and control, such as wired or wireless communication protocols.
  Environmental Ratings: Outlines the sensor’s resistance to dust, moisture, temperature extremes, and other environmental factors, indicating its suitability for different industrial environments.
• Product Specification of IS200TVIBH2BBB:
• Physical Dimensions: Provides the dimensions of the sensor, including length, width, and height, which are important for proper installation and integration into industrial systems.
  Weight: Specifies the mass of the sensor, allowing for considerations in terms of shipping, handling, and installation requirements.
  Material: Describes the material used in the construction of the sensor, which can affect its durability, resistance to corrosion, and overall lifespan.
  Mounting Options: Outlines the different ways in which the sensor can be mounted or installed in an industrial system, including bracket or flange mounting, cable glands, and other attachment mechanisms.
  Output Signal Range: Details the range of values that the sensor’s output signal can take, depending on the measured temperature. This information is critical for proper interpretation and utilization of the sensor’s output data.
  Calibration: Specifies whether the sensor requires calibration and provides information on the calibration process, including recommended intervals and procedures.
  Compliance and Certifications: Lists any safety standards or certifications that the sensor has been tested and complies with, ensuring its compliance with relevant regulations and industry standards.
• Please note that the exact parameters and specifications of the IS200TVIBH2BBB may vary depending on the manufacturer’s revision and model. It is recommended to refer to the manufacturer’s official documentation or contact their technical support for detailed and accurate information about the product.
•