The programmable controller has relay output, thyristor output and transistor output.
Output terminal wiring is divided into independent output and common output. When the PLC output relay or thyristor acts, two output terminals of the same number are connected. In different groups, different types and voltage levels of output voltage can be used. However, the output in the same group can only use the power supply of the same type and voltage level.
Since the output components of PLC are packaged on the printed circuit board and connected to the terminal board, if the load connecting the output components is short circuited, the printed circuit board will be burned. Therefore, the output components should be protected by fuses.
When relay output is adopted, the inductive load it bears will affect the working life of the relay, so the working life of the relay is required to be long.
The output load of PLC may produce noise interference, so measures should be taken to control it.
In addition, for dangerous loads that can cause injury to users, in addition to being considered in the control program, external emergency stop circuits should also be designed so that when the programmable controller fails, the power supply of the load causing injury can be cut off.
The AC output line and DC output line shall not use the same cable, and the output line shall be as far away from the high-voltage line and power line as possible to avoid parallel.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!
Product Description
The IS200STCIH6A is a DIN Rail Contact Terminal Board for a GE Mark VI series turbine control system.
The IS200STCIH6A is a printed circuit board (PCB) that has many different components. There are two large nickel-sized factory drilled holes on the right and left sides of the board. There are also two factory drilled reinforced terminal holes on the bottom left and right corners of the board. Next to the bottom holes are two terminal strips that are numerically labeled. The top set is labeled 1-51 with only the odd numbers while the bottom set is labeled 2-52 with all of the even numbers. There is an RS-232 37-pin female port on the top center edge of the board. The part number label for this board is on the bottom right side of the board in between the corner and large factory drilled holes. There is a white 3-pin jumper just above the top terminal strip on the left side of the board. This PCB also contains 2 transistors, 91 resistors, 27 diodes, and 24 capacitors.
The IS200STCIH6A is a PCB and should be handled carefully. Antistatic procedures should be implemented to prevent any type of damage to the board due to a build-up and release of static electricity. The board should be kept in an antistatic bag or box until it can be installed. When installing the IS200STCIH6A, an antistatic wristband should be worn. To help with installation, it is advisable to make a note of the wiring and cable positions on the old board this one is replacing.
Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts.
All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager).
Our product: brand new original packaging
Our warranty: All new or repaired parts have a 12 month warranty period beginning
Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed!
If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!
