VMIVME-2128 processor

Description

VMIVME-2128

Output Connector Type: Two 96-pin female

connectors are used with this board. For mass

terminations (IDC), an ERNI IDC DIN connector and

0.033-inch 30 AWG ribbon cable are recommended. The

ERNI order numbers are:

96-pin connector 913 031

96-conductor 0.033-inch cable 913 049

For discrete wire use, Harting connectors are

recommended. This connector consists of a contact

housing with female crimp-on contacts. Harting order

numbers are:

96-pin connector 09 03 096 3214

Female crimp-on contacts 09 02 000 8484

Crimp tool (for stripped wire) 09 99 000 0075

The discrete wire connector needs a shell housing that

has holding levers. We recommend the Harting housing.

Its order number is 09 03 096 0501. This housing will

latch the discrete wire cable to the board connector and

provide a strain relief.

I/O Organization: Sixteen output ports, eight bits wide

for a total of 128 inputs, addressable to any address

within the short supervisory and/or short nonprivileged

or the standard supervisory and/or standard

nonprivileged I/O map.

Addressing Scheme: Thirty-two bytes individually

addressable on 8-, 16-, or 32-bit boundaries. A Board ID

Register is located at the base address of the board. A

Control and Status Register (CSR) is stacked above the

VMIVME-2128