ABB F8628X 984862865

Description

ABB F8628X 984862865
The safe decision. productnews The new communication modules enable the programming of the CPUs with ELOP II via Ethernet. These are used with the CPUs which are also new: F 8650X/F 8652X (safe CPU for H51q/H41q systems) F 8651X/F 8653X (non-safe CPU for H51q/H41q systems) The already existing communication modules F 8627 and F 8628 are still available in the product portfolio. Issue March 2006_ Page 1/2 Applications/Accompanying products Part numbers/Delivery date F 8627X: 98 4862765 F 8628X: 98 4862865 Delivery date: immediately 2 new communication modules for H41q/H51q systems • F 8627X: Communication module for the protocols safeethernet and OPC DA via HIMA OPC server New: OPC A&E via HIMA OPC server, MODBUS-TCP slave and ELOP II programming via Ethernet (from ELOP II V. 4.1) Function Even more protocols! F8627X/F8628X Dimensions and weight • F 8628X: Communication module for the protocol Profibus DP slave New: ELOP II programming via Ethernet (from ELOP II V. 4.1) 19-inch module for H41q/H51q systems 3 height units (HU), 3 x 44.45 mm 4 width units (WU), 4 x 5.08 mm

F8627X/F8628X -2

The peripheral interface circuit is used to connect the hand-held programmer or other graphic programmer and text display, and can form the control network of PLC through the peripheral interface. PLC is connected to the computer through PC/PPI cable or MPI card through RS-485 interface, which can realize programming, monitoring, networking and other functions.

The function of the power supply unit is to convert the external power supply (220V AC power supply) into the internal working voltage. The externally connected power supply converts the AC/DC power supply into the working power supply (DC 5 V, positive and negative 12 V, 24 V) required by the internal circuit of the PLC through a special switch type regulated power supply inside the PLC, and provides 24V direct current power supply for external input elements (such as proximity switches) (only for the use of input terminals), while the power supply driving the PLC load is provided by the user.