HONEYWELL CC-IP0101

Description

HONEYWELL CC-IP0101
Detailed Specifications, Modules, and Capacities – Profibus Gateway Module
Parameter Specification
Input / Output Model 8C-IP0102, PROFIBUS Gateway ASSY, Coated
8U- IP0102, PROFIBUS Gateway ASSY, Uncoated
IOTA (64pt) PWA
8C-TPOXA1, Coated
8U-TPOXA1, Uncoated
Supervisory network type Series 8 PGM is a standard FTE node.
Voltage Rating 24 VDC
Module current rating 430 mA
Temperature
Operating Temperature 0 to 60 °C
Storage temperature -40 to 85 °C
Series 8 PGM mounting Mounts on the standard Series 8 mounting assembly (on an
IOTA) and must mount in a standard Series 8 cabinet.
Series 8 PGM power and grounding Must use the standard Series 8 power system.
PROFIBUS DP (V0) supported? Yes – including standard and extended status bytes.
PROFIBUS DP (V1) supported? PGM acts as a DP Master Class-2 device for FDM. FDM
uses vendor provided DTMs to enable DPV1 messaging
over the DP network.
Profidrive DSB has some V1 capabilities (see users
manual).
Module Removal and Insertion
Under Power Supported
PROFIBUS DP (V2) supported? Not supported in release R110.
DP network media redundancy Supported using 3rd party Redundancy Link Modules (like
ABB RLM and Siemens Y Link).
DP Slave device redundancy DP network can include redundant slaves. PGM has no V1
capability with respect to Slave redundancy. FDM may be
able to manage this using vendor supplied DTMs.
PROFIBUS PA and PA devices supported? Yes, using 3rd party PA to DP converters/couples.
Asset Management? Yes- Using Honeywell FDM.
PGM acts as a Master Class-2 device allowing FDM to
access the DP network and DP Slaves. FDM utilizes DTMs
to communicate with DP slaves.
Simulation supported? No simulation capabilities for R110.
HART over PROFIBUS support Yes – Using FDM and Slaves that support HART devices.