HONEYWELL CC-TAIX01

Description

HONEYWELL CC-TAIX01
Technical Data
Supply
Connection TB3: terminals 2, 4(+); 1, 3(-)
Nominal voltage 24 V DC , in consideration of rated voltage of used isolators
Voltage drop 0.9 V , voltage drop across the series diode on the termination board must be
considered
Ripple ≤ 10 %
Fusing 2 A , in each case for 8 modules
Technical Data
Power dissipation ≤ 500 mW , without modules
Reverse polarity protection yes
Redundancy
Supply Redundancy available. The supply for the isolators is decoupled, monitored and fused.
Fault indication output
Connection TB4: terminals 1, 2
Output type volt-free contact
Switch behaviour no fault: relay contact closed
power supply fault: relay contact open
module fault: relay contact open
Contact loading 30 V DC , 1 A
Indicators/settings
Display elements LED Supply1 (power supply termination board), green LED
LED Supply2 (power supply termination board), green LED
LED Fault Status (fault indication), green LED
– LED lits: no module fault/no power supply fault
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility NE 21:2017
For further information see system description.
Degree of protection IEC 60529:2001
Ambient conditions
Ambient temperature -20 … 60 °C (-4 … 140 °F)
Storage temperature -40 … 70 °C (-40 … 158 °F)
Mechanical specifications
Degree of protection IP20
Connection
Field side explosion hazardous area: pluggable screw terminals , blue
Control side non-explosion hazardous area: 37-pin Sub-D connector
Supply pluggable screw terminals , black
Fault output pluggable screw terminals , black
Core cross section screw terminals: 0.25 … 2.5 mm2
(24 … 12 AWG)
Material housing: polycarbonate
Mass approx. 540 g
Dimensions 201 x 155 x 153 mm (7.9 x 6.1 x 6.0 inch) (W x H x D) , depth including module
assembly
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate CESI 11 ATEX 062
Marking 1 II (1)G [Ex ia Ga] IIC
1 II (1)D [Ex ia Da] IIIC
1 I (M1) [Ex ia Ma] I
Non-hazardous area
Maximum safe voltage 250 V (Attention! Um is no rated voltage.)
Galvanic isolation
Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
Control drawing see control drawing of correspoding modules
IECEx approval
IECEx certificate IECEx CES 11.0022