HONEYWELL CC-TAOX11

Description

HONEYWELL CC-TAOX11Experion Series C input/output chassis-less mounted modules and field level network gateways provide
the physical connection between an automation system and the process when used with the C300
Controller. Input/Output Modules and field terminations are combined in the same area. The Input/Output
Modules are plugged into Input /Output Termination Assemblies to eliminate the need for a separate
chassis to hold the electronics assemblies.
C300 Controller
The C300 Controller is constructed using the Series C form factor that employs an Input Output
Termination Assembly (IOTA) and an electronics module which mounts and connects to the IOTA. One
C300 Controller contains all of the control functionality and the communications functions with plug-in
modules.
The C300 Controller may operate in both non-redundant and redundant configurations. Redundant
operation requires a second identical controller and connecting cables, which is the typical configuration.
The C300 Controller is connected to the associated I/O hardware by a pair of I/O Link Interface cables
The table below identifies the C300 Controller components and its associated components. TheC300
Controller supports non-redundant and fully redundant operation. Redundancy is built in to the controller,
so that just adding another controller and a redundancy cable; a redundant controller pair is achieved.
Note that the ‘CC’ designation on the model number indicates the printed wiring boards are conformally
coated for additional protection from the environment, (CU = uncoated).
Components Description Model No.
C300 Controller Module A distributed process controller and I/O gateway for the Experion
system. Module contains printed circuit assemblies, status
indicators and a display, inside in a plastic housing. Module
mounts to its Input Output Termination Assembly (IOTA).
Supply Rating: 0.311A @ 24VDC
CC-PCNT01
CU-PCNT01
C300 Controller Input
Output Termination Assembly
(IOTA)
Provides the connection point for theC300 Controller module and
all cable terminations to the controller, (FTE, IO Link,
Redundancy, Battery and Time Source cable terminations).
Provides 24Vdc power distribution to the controller module.
Supply Rating: 0.311A @ 24VDC
Note: The C300 Controller IOTA supports only one controller
module.
CC-TCNT01
CU-TCNT01
9 Port FTE Control
Firewall Module
Provides FTE distribution to in-cabinet network nodes.
(C300 Controllers and Series C Modules)
Supply Rating: 0.112A @ 24VDC
CC-PCF901
CU-PCF901
9 Port Control Firewall IOTA Provides connection for eight FTE cables from in-cabinet
controllers and Series CFIMs. The 9th port provides an uplink to
the FTE supervisory network. Provides 24Vdc power distribution
to the control.
Ethernet: 9 RJ-45 Connections
Fiber-Optic: Model Ca-FSMx01 FTE Single Mode Fiber Module
Supply Rating: 0.30mA@24VDC
Model Ca-FMMx01 FTE Multi-Mode Fiber Module
Supply Rating: 0.30mA@24VDC
CC-TCF901
CU-TCF901
The Series C modules comprise:
 Input Output Termination Assembly (IOTA): An assembly that holds the IOM and the
connections for field wiring,
 Input Output Module (IOM): A device that contains most of the electronics required to perform a
specific I/O function. The IOM plugs onto the IOTA.