METSO+D201190

Description

The model number “METSO D201190 Module” is likely associated with ABB’s Advant OCS system (also known as Valmet Automation’s Valmet 8000 DCS system), a Distributed Control System (DCS) used in various industries like power generation, pulp and paper, and water treatment. Here’s what I can share based on the available information:

Potential Product Name and Description:

The module is likely an ABB Advant OCS Module (or Valmet 8000 DCS Module) with the model number D201190.
Due to the limited information and the variation across specific models, pinpointing its specific function within the DCS is challenging. However, based on the historical use of the “D” prefix in these systems, it potentially belongs to the I/O (Input/Output) module category. I/O modules handle signal exchange between the DCS controller and field devices like sensors and actuators.
Possible Functionalities:

Digital I/O Module (most likely): Based on the prevalent use of “D” for digital modules in these systems, it’s highly probable that the D201190 module is a digital I/O module. This module would handle digital signals (on/off or high/low) from sensors (e.g., limit switches, pushbuttons) and send digital control signals to actuators (e.g., solenoid valves, motor starters) within the process.
Analog I/O Module (less likely): While less probable based on the historical prefix usage, it’s still a possibility. In this case, the module would convert analog signals from sensors (e.g., voltage or current readings) into digital representations for the DCS controller and vice versa for controlling analog actuators.
Information Needed for Specific Details: