Vibro-meter 200-505-012-011

Description

Vibro-meter 200-505-012-011
Vibro-meter 200-505-012-011
NOTE: If you are in any doubt as to the validity of a particular configuration then you should
contact Meggitt customer support for assistance (see 4.1 Contacting us).
The checks summarised in Table 1-7 apply only to racks using an RLC16 relay card as part
of a safety function.
The checks summarised in Table 1-8 need only to be made if a signal from a sensor that is
locally attached to the safety-relevant IOC4T is routed using the Raw Bus to a separate
VM600 card, such as an XMV16 vibration monitoring card. The measures for the XIO16T are
needed to cover the unlikely event of a failure of the MOSFET switch matrix that is used by
this card.
Other cards use a physical jumper matrix only to racks using an RLC16 relay card as part of
a safety function.
Table 1-7: OC Bus checks for safety-related systems that contain a RLC16 card
Rack contains Verification step Configuration aid
Single MPC4/IOC4T
card pair No additional checks are required
Additional MPC4/IOC4T
card pairs Check the configuration for conflicts VM600 MPSx©
software
Additional AMC8/IOC8T
card pairs
Place in a different OC Bus partitionSee
note 1
VM600 MPSx©
software
IRC4 card Place in a different OC Bus partitionSee
note 1
IRC4 Configurator
software
XMx16/XIO16T
card pairs
Place in a different OC Bus partitionSee
note 1
VibroSight®
software
Notes
1. The split of the OC Bus into six (6) discrete sections is described in section 3.4.3 The Open Collector Bus of the
VM600 machinery protection system (standard version) hardware manual.

Rack contains Verification step / requirement Configuration aid
Single MPC4/IOC4T
card pair No additional checks are required
Additional MPC4/IOC4T
card pairs Check the configuration for conflicts VM600 MPSx©
software
Additional AMC8/IOC8T
card pairs Check for double utilisation VM600 MPSx©
software
CMC16/IOC16T
card pairs No additional checks are required
IRC4See note 1 Verify configuration
XMx16/XIO16T
card pairs Verify configuration VibroSig